What we use tungsten for

Where does it go, and why this element?

About two thirds of tungsten becomes tungsten carbide for cutting tools, drill bits and wear parts. The rest goes into steels and superalloys, tungsten metal and chemicals. Transport and mining and construction use the most. Substitutes usually cost more or work less well.

Last updated 15 October 2026.

Where it goes

Where it goes (World)
Transport 26%
Mining and construction 26%
Other industry 14%
Chemicals and petrochemicals 10%
Consumer durables 9%
Defense 8%
Energy 6%
Medical and pharmaceutical 1%
2021. End use of tungsten by industry, world, 2021, from ITIA. By material, ITIA gives 65% for tungsten carbide products, 14% for steels and superalloys, 12% for tungsten metal products and 9% for chemicals and other uses1
Where it went over time, in tonnes (United States)
  • Chemical uses
  • Steels, alloys and mill products
  • Cemented carbides
0 5,000 10,000 15,000 1975 1980 1985 1990 1995 2000 Cemented carbides Steels, alloys and mill products
US consumption of tungsten by end use, tonnes of tungsten content, 1975 to 2003. USGS historical end-use statistics (Matos and Shedd). From 1999 the USGS counts mill products with steels and other alloys, so this series adds the two columns for every year. The USGS made these estimates by applying end-use percentages to apparent consumption. USGS Mineral Commodity Summaries give later US shares on other categories, so we did not join them to this series2
Show the numbers
Year Cemented carbidesSteels, alloys and mill productsChemical uses Total
1975 4,090 t2,070 t166 t 6,330 t
1976 4,810 t2,630 t329 t 7,770 t
1977 5,410 t2,860 t143 t 8,410 t
1978 6,380 t3,500 t217 t 10,100 t
1979 6,410 t3,440 t250 t 10,100 t
1980 6,370 t3,150 t428 t 9,950 t
1981 6,840 t3,050 t413 t 10,300 t
1982 3,540 t2,200 t315 t 6,050 t
1983 4,140 t2,280 t73 t 6,490 t
1984 6,640 t3,420 t139 t 10,200 t
1985 5,280 t2,840 t86 t 8,210 t
1986 4,880 t2,860 t30 t 7,770 t
1987 4,470 t3,440 t45 t 7,960 t
1988 6,350 t4,540 t111 t 11,000 t
1989 6,470 t3,770 t67 t 10,300 t
1990 5,060 t3,330 t49 t 8,440 t
1991 7,350 t4,380 t65 t 11,800 t
1992 4,520 t2,510 t42 t 7,070 t
1993 4,760 t2,330 t37 t 7,130 t
1994 5,790 t2,040 t99 t 7,930 t
1995 7,490 t2,480 t130 t 10,100 t
1996 7,980 t2,800 t129 t 10,900 t
1997 8,710 t3,320 t171 t 12,200 t
1998 8,580 t3,600 t125 t 12,300 t
1999 8,740 t4,030 t137 t 12,900 t
2000 9,250 t5,010 t138 t 14,400 t
2001 9,010 t5,360 t128 t 14,500 t
2002 6,050 t5,680 t167 t 11,900 t
2003 5,490 t4,480 t136 t 10,100 t

Most tungsten is used as tungsten carbide. ITIA gives these shares of world use by material1111:

Material Share of use
Tungsten carbide products 65%
Steels and superalloys 14%
Tungsten metal products 12%
Chemicals and other 9%

Tungsten carbide is mostly used in cemented carbide, also called hardmetal. Hardmetal is used in cutting tools for metal, wood and plastic, in rock drills, and in wear parts for tunnel boring and road building1. In steels, tungsten makes tools harder. In superalloys, it helps turbine blades in jet engines and power plants resist heat1.

Tungsten metal goes into wires and sheets for high temperatures, electrical contacts, and welding electrodes. Heavy alloys of tungsten with nickel, iron or other metals are used for ammunition, counterweights and radiation shields1. The IEA calls tungsten fundamental for armor-piercing projectiles and fragmentation weapons3.

By industry, ITIA gives these shares for 2021. Transport and mining and construction each use 26%1. Other industry uses 14%, chemicals 10%, consumer goods 9%, defense 8% and energy 6%1. About three quarters of transport is the car industry, which makes it the largest single user. Most of its tungsten is in tools to machine and shape parts1. In this way, many products need tungsten but do not contain it1.

In the United States, about 60% of tungsten goes into cemented carbide parts4. In the USGS estimates of US use from 1975 to 2003, cemented carbides were the largest use in every year. They took 4,090 of 6,330 tonnes in 197522. In 2003 they took 5,490 of 10,100 tonnes. Steels, alloys and mill products took 4,480 tonnes22.

Why this element

Tungsten has the highest melting point of all metals and one of the highest densities. As tungsten carbide, it is almost as hard as diamond5. ITIA gives the melting point as 3,422°C and the density as 19.25 grams per cubic centimeter6. That is about the density of gold7. According to ITIA, it expands the least of all metals when heated6.

Cemented carbide joins two properties that usually exclude each other. A typical grade is 90% tungsten carbide and 10% cobalt. The carbide gives hardness and the cobalt gives toughness1.

For many years, tungsten was best known in light bulbs. Many countries have now phased out these bulbs, because they make more heat than light8.

What could replace it

USGS lists possible substitutes for cemented carbide: carbides of molybdenum, niobium or titanium, ceramics, cermets and tool steels. Most of them reduce the amount of tungsten rather than replace it4.

For high density and radiation shields, depleted uranium or lead can replace tungsten. For armor-piercing projectiles, depleted uranium alloys or hardened steel can replace it. Light-emitting diodes (LEDs) replace tungsten filaments4. USGS notes that substitution can raise costs or lower performance4.

Where demand is going

Use of tungsten follows the world economy. It falls in recessions and rises in good times1. According to ITIA, end use grew by 3.4% a year on average from 2007 to 20211.

The IEA names aerospace and defense as sectors that depend on tungsten3. It also lists tungsten among the materials used in making semiconductors3.

Sources

  1. 1

    International Tungsten Industry Association (ITIA), 2026. Applications & Markets , First-Use by material; End-Use by industry; End-Use by region; End-Use consumption.

    World first use and end use of tungsten, by material, industry and region. An industry association.

    • Transport 26 2 Mining & Construction 26 3 Industrial Use 14 4 Chemical / Petrochemical 10 5 Consumer Durables 9 6 Defence 8 7 Energy 6 8 Medical / Pharmaceutical 1
    • Tungsten carbide products represent almost two-thirds (65%) of total global consumption
    • accounting for 14% of global tungsten consumption
    • Tungsten metal products are the third largest First-Use segment with a share of 12% of global consumption
    • with catalysts as their major field of application and a share of 9%
    • Hardmetals are used for metal machining, rock drilling, wood and plastic cutting. The high abrasion resistance is used in wear parts for tunnel boring, road construction, agriculture and many more applications
    • Tungsten acts as a hardening element in steels, such as High Speed Steels used as tools, and makes super alloys high temperature resistant, as is mandatory for turbine blades in jet engines or power generation
    • tungsten heavy alloys (with iron, nickel, cobalt and copper) for ammunition, counterweights, vibration damping and radiation shielding
    • With an almost equal share, Transport and Mining & Construction account for more than half of global tungsten End-Use consumption
    • Chemical and Petrochemical (10%), Consumer Durables (9%), Energy (6%), Defence (8%) and Industrial Use (14%)
    • Approximately three-quarters of the Transport segment is automotive , making this industry the single biggest tungsten consumer worldwide. Hardmetals (tungsten carbide products) are the most important material in this segment and are mainly used as tools for machining and forming
    • An end product may not actually contain tungsten but, without tungsten being used during its creation, the product may not exist
    • A typical example of such an alloy would be 90% tungsten carbide with 10% cobalt, a so-called straight grade. This produces a perfect combination of high hardness (from tungsten carbide) and high toughness (from cobalt)
    • In times of economic uncertainty and/or recession, tungsten consumption suffers, while in times of economic prosperity it goes up
    • the compound annual growth rate from 2007 to 2021 was 3.4%
  2. 2

    U.S. Geological Survey (G.R. Matos and K.B. Shedd), 2005. Tungsten end-use statistics, in Historical Statistics for Mineral and Material Commodities in the United States (Data Series 140) , Table 'Tungsten end-use statistics', page 1; 'Tungsten End-Use Worksheet Notes', page 2.

    US consumption of tungsten by end use, 1975 to 2003.

    • 4,090 166 732 1,340 1975
    • 1976 4,810 329 1,130 1,500
    • 1977 5,410 143 1,240 1,620
    • 1978 6,380 217 1,500 2,000
    • 1979 6,410 250 1,660 1,780
    • 1980 6,370 428 1,600 1,550
    • 1981 6,840 413 1,880 1,170
    • 1982 3,540 315 1,450 745
    • 1983 4,140 73 1,550 728
    • 1984 6,640 139 2,030 1,390
    • 1985 5,280 86 1,890 954
    • 1986 4,880 30 1,800 1,060
    • 1987 4,470 45 2,120 1,320
    • 1988 6,350 111 2,740 1,800
    • 1989 6,470 67 2,500 1,270
    • 1990 5,060 49 2,290 1,040
    • 1991 7,350 65 2,870 1,510
    • 1992 4,520 42 1,340 1,170
    • 1993 4,760 37 1,350 981
    • 1994 5,790 99 1,120 917
    • 1995 7,490 130 1,360 1,120
    • 1996 7,980 129 1,880 918
    • 1997 8,710 171 2,170 1,150
    • 1998 8,580 125 1,950 1,650
    • 4,030 1999 8,740 137
    • 5,010 2000 9,250 138
    • 5,360 2001 9,010 128
    • 5,680 2002 6,050 167
    • 4,480 2003 5,490 136
    • Apparent consumption 6,330
    • 11,900 10,100 End Uses of Tungsten
  3. 3

    International Energy Agency, 2026. Global Critical Minerals Outlook 2026 , 1. Market review (prices, export controls); defence applications.

    The rise in tungsten prices from January 2025 to April 2026, export controls and defense uses.

    • Tungsten is fundamental for kinetic energy penetrators and fragmentation applications, primarily because its exceptionally high density and hardness enable effective penetration of hardened targets at high speed
    • the aerospace and defence sectors depend on minerals including cobalt, titanium, tungsten and yttrium to meet stringent performance requirements
    • other materials such as antimony, tantalum, tungsten, copper, gold, silver, aluminium, nickel, cobalt, palladium, platinum, hafnium, titanium, certain rare earth elements, tin and zinc play important roles in soldering, electrical contact formation, coating and packaging
  4. 4

    U.S. Geological Survey (S.H. Saloum), 2026. Tungsten, in Mineral Commodity Summaries 2026 , p. 1, Domestic Production and Use, Salient Statistics, Recycling, Import Sources, Government Stockpile; p. 2, Events, World Mine Production and Reserves, World Resources, Substitutes, footnotes.

    World production and reserves by country, US use, prices, events of 2025, substitutes.

    • An estimated 60% of the tungsten consumed in the United States was used in cemented carbide parts for cutting and wear-resistant applications
    • Potential substitutes for cemented tungsten carbides include cemented carbides based on molybdenum carbide, niobium carbide, or titanium carbide; ceramics; ceramic-metallic composites (cermets); and tool steels. Most of these options reduce rather than replace the amount of tungsten used
    • light-emitting diodes for lighting based on tungsten electrodes or filaments; depleted uranium or lead for tungsten or tungsten alloys in applications requiring high density or the ability to shield radiation; and depleted uranium alloys or hardened steel for cemented tungsten carbides or tungsten alloys in armor-piercing projectiles
    • In some applications, substitution would result in increased cost or a loss in product performance
  5. 5

    U.S. Geological Survey (K.B. Shedd), 2025. Tungsten, in 2021 Minerals Yearbook (advance release) , Consumption; Prices; Government Actions and Legislation; World Review (China, Congo (Kinshasa), Rwanda, Bolivia, Portugal, Austria, United Kingdom, Vietnam).

    Properties and uses, conflict minerals rules, China's controls on mining and exports, producers by country.

    • Tungsten is a whitish-gray metal with the highest melting point and one of the highest densities of all metals. When combined with carbon to make tungsten carbide, it is almost as hard as diamond
  6. 6

    International Tungsten Industry Association (ITIA), 2026. Properties & Intermediates , Properties of the metal; Intermediates (APT, oxides, carbide powder, ferro tungsten).

    Physical properties of tungsten and how the intermediate products are made. An industry association.

    • Tungsten has the highest melting point of all metals (3,422 ± 15°C) … With its density of 19.25g/cm3, tungsten is also among the heaviest metals
    • its coefficient of thermal expansion is the lowest of all metals
  7. 7

    British Geological Survey (P. Pitfield and T. Brown), 2011. Tungsten (Mineral Profile) , Definitions, mineralogy and deposits; Extraction methods and processing; World production.

    Deposit types, ore grades, alloys, recycling and China's share of production from 1989 to 2009.

    • It is remarkable also for its very high density, similar to gold
  8. 8

    Royal Society of Chemistry, 2026. Tungsten (Periodic Table) , Key facts; Uses and properties; Biological role; History; Podcast transcript.

    Discovery, name, uses, biological role, the IUPAC name decision of 2005.

    • Tungsten was used extensively for the filaments of old-style incandescent light bulbs, but these have been phased out in many countries. This is because they are not very energy efficient; they produce much more heat than light