How we get tungsten

How much do we make each year, and how?

USGS estimates world mine production at about 85,000 tonnes of tungsten in 2025, about four fifths of it in China. Ore is concentrated at the mine, then turned into ammonium paratungstate (APT). Scrap gives about a third of the tungsten that industry uses.

Last updated 14 October 2026.

How much is produced

Production

~ 85thousand tonnes a year1

2025. World mine production, tungsten content of concentrates, USGS estimate for 2025. USGS gives 82,000 t for 2024.

This counts tungsten from mines only. ITIA estimates that about a third of the tungsten that industry uses comes from scrap.

Production over time
0 25k 50k 75k 1920 1940 1960 1980 2000
Unit: t. World mine production of tungsten, tonnes of tungsten content in concentrate, from the USGS historical statistics, every year 1905 to 2019. USGS took the data from its Minerals Yearbook and the earlier Mineral Resources of the United States. USGS has not published a later edition of this workbook. USGS estimates 85,000 t for 20252
Show the numbers
Yeart
19051,700
19061,900
19072,600
19081,800
19092,500
19103,300
19113,200
19124,200
19133,900
19143,500
19155,200
191610,000
191712,300
191815,200
19197,000
19205,500
19212,300
19223,000
19233,300
19242,900
19254,900
19265,800
19274,400
19285,500
19297,500
19307,900
19316,400
19323,200
19335,900
19347,800
193510,700
193611,800
193718,500
193817,800
193920,100
194020,700
194123,900
194224,100
194328,600
194423,400
194510,900
19469,040
194713,700
194817,800
194915,800
195018,300
195124,800
195232,700
195334,400
195433,800
195535,700
195635,800
195729,100
195824,200
195926,400
196031,200
196133,000
196231,300
196327,100
196428,100
196527,000
196628,600
196728,500
196831,000
196932,500
197032,400
197135,400
197238,500
197337,900
197437,600
197538,300
197638,000
197741,100
197846,100
197948,600
198052,000
198150,300
198247,000
198340,900
198446,200
198546,600
198643,500
198742,500
198850,900
198951,000
199051,900
199148,200
199242,900
199334,300
199434,000
199538,500
199634,700
199733,200
199837,000
199937,700
200044,000
200150,800
200247,000
200347,200
200466,300
200559,500
200656,600
200753,600
200861,900
200961,200
201068,400
201173,900
201277,700
201379,400
201482,100
201583,700
201678,400
201781,400
201882,200
201983,800

USGS estimates that mines produced about 85,000 tonnes of tungsten in 2025, up from 82,000 tonnes in 20241. These figures are the tungsten content of concentrates.

Output grew in steps. By USGS data, world production was 1,700 tonnes in 1905, 15,200 tonnes in 1918 and 28,600 tonnes in 1943. It reached 52,000 tonnes in 1980, fell to 34,300 tonnes in 1993, and was 83,800 tonnes in 20192.

ITIA publishes its own estimate. It gives 101,000 tonnes of tungsten trioxide from mines in 20223. Tungsten trioxide is 79.3% tungsten4, so this is about 80,000 tonnes of tungsten (our calculation). For 2023, USGS gave 79,500 tonnes5.

Who produces it

Mine production by country
China (est.) 79% 67,000 t
Vietnam (est.) 3.5% 3,000 t
Kazakhstan (est.) 2.8% 2,400 t
North Korea (est.) 2.4% 2,000 t
Russia (est.) 2.4% 2,000 t
Bolivia (est.) 2% 1,700 t
Rwanda (est.) 1.5% 1,300 t
Australia (est.) 1.2% 1,000 t
Rest of the world 5.4% 4,600 t
2025. Mine production, tungsten content, USGS. All values are estimates. World: 85,000 t. Kazakhstan started production in 2025 at the Boguty deposit. USGS revised the 2024 value for Russia1

China is by far the largest producer. USGS estimates its 2025 output at 67,000 tonnes1. The next producers mined much less: Vietnam about 3,000 tonnes, Kazakhstan 2,400, and Russia and North Korea about 2,000 each1. Kazakhstan’s output is new. It comes from the Boguty deposit, which started production in 20251.

China’s share has changed over time. BGS gives 58% of world production in 1989, a peak of 89% in 2004, and 80% in 20096.

Most tungsten comes from large mechanized mines. Small-scale and artisanal mining gives all or part of the output in Bolivia, Brazil, Burundi, Congo, Nigeria, Rwanda, Uganda and Vietnam4.

The United States has had no commercial tungsten mine since 20151. In Europe, mines work in Austria, Portugal and Spain. Examples are Mittersill in Austria and Panasqueira in Portugal44.

How it is mined and refined

Tungsten is mined in open pits and underground, as for many other metals6.

At the mine, the ore is crushed and the tungsten mineral is separated. Both minerals are heavy, so gravity methods work. Scheelite can also be floated off with chemicals. Wolframite cannot, but a strong magnet can separate it33. Both minerals are brittle and can be ground too fine, which loses tungsten3.

The concentrate goes to chemical plants. These make ammonium paratungstate (APT), the starting material for most tungsten products7. APT is turned into tungsten oxide. Hydrogen reduces the oxide to tungsten metal powder7. The powder is heated with carbon at 1,300 to 2,200°C to make tungsten carbide powder7.

For steel, producers make ferrotungsten, an alloy of iron with 75% to 85% tungsten, directly from rich concentrate or scrap77.

China also leads in these later steps. In 2021, for the first time, China turned more than half of its APT into cemented carbide4.

What it costs to produce

We found no published figures for the cost of producing tungsten across the industry. ITIA describes the costs in general terms. Early projects have a high risk of failure, and building a mine needs large investments8.

The Hemerdon mine in England is an example. It stopped in October 2018 when its owner went into administration4. The next owner found that the processing plant needed changes because the ore broke up too easily4.

Recycling

End-of-life recycling

31%9

Other sources: 30% in 2016 (ITIA (Zeiler et al.), 2021)10; 10 to 25% (UNEP, 2011)11; 66%, United States (UNEP, 2011)11.

World end-of-life recycling rate, weighted by first use, from the UK 2024 criticality assessment (31.19%). It counts 40% for carbide products (65% of use), 15% for steels and superalloys (14%), 22% for metal products (12%) and 5% for chemicals (9%), from ITIA data.

The EU (2023) gives an end-of-life recycling input rate of 42%.

Recycled content

35%10

Other sources: 46%, United States (UNEP, 2011)11.

2016. Share of scrap (new and old) in the tungsten used to make intermediate products, world, 2016, from the ITIA flow model as published by Zeiler, Bartl and Schubert.

ITIA still gives 'around 35%' on its website. UNEP (2011) gives a recycled content of 46%, a figure for the United States.

Scrap is an important source of tungsten. ITIA mapped the world flow of tungsten in 2016. Of 108,500 tonnes used to make intermediate products, 37,500 tonnes were scrap, a recycling input rate of 35%10.

For products at the end of their life, the rate is lower. ITIA estimates that about 30% of tungsten comes back. The rest is lost by wear, by dilution in other scrap such as ordinary steel, or by discard8. Other estimates differ. The UK 2024 assessment gives 31%9. UNEP gave 10% to 25% in 201111.

The rate depends on the product. Tungsten carbide products are about 46% recycled, and cutting tools about 55%10. Cutting inserts used in factories are more than 95% recycled8. Tungsten in steels and chemicals is mostly lost9.

Recycling can save energy. One process dissolves cemented carbide scrap in zinc. It uses about 4 kWh per kg, compared with 12 kWh per kg for new tungsten carbide made by the chemical route10. Tungsten has been recovered from used products since the early 1930s10.

Sources

  1. 1

    U.S. Geological Survey (S.H. Saloum), 2026. Tungsten, in Mineral Commodity Summaries 2026 , p. 1, Domestic Production and Use, Salient Statistics, Recycling, Import Sources, Government Stockpile; p. 2, Events, World Mine Production and Reserves, World Resources, Substitutes, footnotes.

    World production and reserves by country, US use, prices, events of 2025, substitutes.

    • World total (rounded) ... 82,000 85,000
    • World total (rounded) … 82,000 85,000
    • Mine productione 2024 2025 — — 920 1,000 840 840 1,700 1,700 67,000 67,000 — 2,400 1,900 2,000 650 700 1,500 2,000 1,300 1,300 700 800 3,400 3,000 1,700 2,400 82,000 85,000
    • 67,000 67,000
    • 2,400 1,900 2,000 650 700 1,500 2,000 1,300 1,300 700 800 3,400 3,000
    • World mine production increased, especially from the start of production at the Boguty deposit in Kazakhstan
    • Tungsten has not been mined commercially in the United States since 2015
  2. 2

    U.S. Geological Survey (C.A. DiFrancesco and K.B. Shedd), 2021. Tungsten statistics, in Historical Statistics for Mineral and Material Commodities in the United States (Data Series 140) , ds140-tungsten-2019.xlsx, columns 'Unit value ($/t)', 'Unit value (98$/t)' and 'World production', and the embedded worksheet notes.

    World mine production 1905 to 2019, the US unit value 1900 to 2019, and the start of US stockpiling.

    • World production data are tungsten content of concentrate
    • 1700 … 15200 … 28600 … 52000 … 34300 … 83800
  3. 3

    International Tungsten Industry Association (ITIA), 2024. Tungsten mining, part 1: project generation and project development , Mineralogy; Deposit types; Project Development.

    Tungsten minerals, deposit types and grades, where deposits are, the size of the industry, mine development times.

    • According to ITIA’s Statistical Overview for 2022, primary mine production of tungsten totaled 101,000t WO3
    • - amenable to flotation
    • - not amenable to flotation. - paramagnetic – can be upgraded by high-intensity magnetic separation
    • brittle: not a good placer mineral; risk of overgrinding during comminution
  4. 4

    U.S. Geological Survey (K.B. Shedd), 2025. Tungsten, in 2021 Minerals Yearbook (advance release) , Consumption; Prices; Government Actions and Legislation; World Review (China, Congo (Kinshasa), Rwanda, Bolivia, Portugal, Austria, United Kingdom, Vietnam).

    Properties and uses, conflict minerals rules, China's controls on mining and exports, producers by country.

    • WO3 is 79.3% tungsten by weight
    • Most of the world’s tungsten was mined from industrial-scale mechanized mining operations. Artisanal and (or) small-scale mining accounted for all or some of the tungsten mined in Bolivia, Brazil, Burundi, Congo (Kinshasa), Nigeria, Rwanda, Uganda, Vietnam
    • The sole producer of tungsten concentrate in Portugal was the Panasqueira Mine
    • WBH operated the Mittersill scheelite mine and beneficiation plant in the State of Salzburg
    • for the first time, China converted more than one-half of its APT production to cemented carbide parts
    • which ceased operation in October 2018 when former owner Wolf Minerals Ltd. (Australia) went into voluntary administration
    • The modifications were intended to resolve problems resulting from the friability of the main tungsten mineral present in the ore
  5. 5

    U.S. Geological Survey, 2025. Tungsten, in Mineral Commodity Summaries 2025 , p. 2, Events, Trends, and Issues.

    The US Section 301 tariff increase of September 2024 on tungsten products from China.

    • 3,500 3,400 1,320 1,500 79,500 81,000
  6. 6

    British Geological Survey (P. Pitfield and T. Brown), 2011. Tungsten (Mineral Profile) , Definitions, mineralogy and deposits; Extraction methods and processing; World production.

    Deposit types, ore grades, alloys, recycling and China's share of production from 1989 to 2009.

    • In 1989 it accounted for 58 per cent of the world total but this rose to reach a high of 89 per cent in 2004. In recent years this proportion has fallen slightly but it remained at 80 per cent in 2009
    • Tungsten mining techniques are similar to many other metals of similar occurrence … The common excavation types are surface (or open pit) mining and sub-surface (or underground) mining, or a combination of both
  7. 7

    International Tungsten Industry Association (ITIA), 2026. Properties & Intermediates , Properties of the metal; Intermediates (APT, oxides, carbide powder, ferro tungsten).

    Physical properties of tungsten and how the intermediate products are made. An industry association.

    • is the most important precursor for the majority of tungsten products
    • The main use for tungsten oxide is to produce tungsten metal powder by hydrogen reduction
    • is mixed with carbon black, C, and treated at temperatures between 1,300 up to 2,200oC in hydrogen atmosphere to produce tungsten carbide powder
    • Ferro tungsten , FeW, is a master alloy for the production of tungsten-containing steels. The raw materials for ferro-tungsten production are rich ore or concentrates of wolframite or scheelite. Also, artificial scheelite or soft scrap can be used
    • between 75 and 85% W
  8. 8

    International Tungsten Industry Association (ITIA), 2026. Supply & Circularity , Secondary supply; Primary supply.

    Recycling rates, losses, minerals, reserves and mine development. An industry association.

    • While in the early stage of the process, there is still a high risk that it may turn out not be feasible to go ahead and the final stages of actual mine construction usually involve high investments
    • Around 30% flows in a circular way, while 70% is lost by: dissipation during use – for example, by abrasion as a wear part dilution by
    • For some of the tungsten products, such as cutting inserts for machining, recycling rates already today exceed 95% in industrial environment
  9. 9

    UK Critical Minerals Intelligence Centre, British Geological Survey, 2024. UK 2024 Criticality Assessment , Criticality scores table; comparison with other countries' lists; appendix table of end uses (Tungsten); synthesized EoLRR table.

    Tungsten is critical for the UK in 2024 and 2021; world first uses and an end-of-life recycling rate of 31%.

    • Tungsten (W) 31
    • Steels & superalloys 14 15 Tungsten metallic products 12 22 Chemicals and others 9 5
  10. 10

    B. Zeiler, A. Bartl, W.-D. Schubert (International Journal of Refractory Metals and Hard Materials 98, 105546), 2021. Recycling of tungsten: Current share, economic limitations, technologies and future potential , Sections 2 to 4 and 7; Fig. 3 (global tungsten flow 2016).

    The world tungsten flow of 2016, recycling input and end-of-life recycling rates, recycling by product group.

    • based on the estimate for old scrap generated (29,000 t) an end-of-life recycling rate of 30% can be calculated
    • The total input for production of intermediates was 108,500 t (metric tons tungsten content) from which 37,500 t were scrap (new and old scrap), which results in a recycling input rate of 35%
    • The estimate for the current overall global recycling rate of tungsten carbide products is 46%. Based on feedback from large cemented carbide producers and tungsten carbide powder manufacturers, the share is the largest for cutting tools, with an average of 55%
    • consumption is approximately 4kWh/kg, which compares favourably to virgin WC produced via the chemical route (12 kWh/kg)
    • In the case of tungsten, recovery from used products can be traced back to the early 1930s
  11. 11

    UNEP International Resource Panel (T.E. Graedel et al.), 2011. Recycling Rates of Metals: A Status Report , Table F1 (specialty metals), W row.

    End-of-life recycling rate (10 to 25%, and 66% for the United States) and recycled content (46%) of tungsten.

    • W 80i 46i 10 –25, 66i