What we use fluorine for
Where does it go, and why this element?
About half of all fluorspar becomes hydrofluoric acid, the start of refrigerants, plastics such as Teflon, and battery chemicals. Steel mills and aluminum smelters use most of the rest. Fluorine forms many stable compounds, and aluminum smelting has no substitute for it.
Last updated 5 October 2026.
Where it goes
By estimates that USGS reports, 51% of the fluorspar used in the world in 2022 went into hydrogen fluoride. Steelmaking flux took 23%. Aluminum fluoride and cryolite for aluminum smelting took 19%. Other uses took the remaining 7%1. USGS took these shares from a 2020 report by the consultancy Roskill. An EU study cites the same consultancy and USGS. It gives wider ranges: 40 to 48% for chemicals, 33 to 35% for steel and 15 to 19% for aluminum2.
Hydrogen fluoride is the start of almost all fluorine chemicals. The main ones are refrigerants and fluoropolymers, plastics such as Teflon. It is also used to process aluminum and uranium3. Oil refineries use it as a catalyst. Chip makers use it to clean and etch silicon wafers3.
In steelmaking, fluorspar is a flux. It makes the slag flow more easily1. Smaller uses include cement, ceramics, enamel, glass and welding rod coatings1.
Fluorine is also in toothpaste and in the water supply of many cities, to prevent tooth decay4. Fluorosilicic acid from phosphate plants is one source of the fluoride added to drinking water5.
The mix has changed. US use in steel and glass fell over the last 20 to 30 years, because of substitutes and changes in industry practice1. In the late 1970s, US steel mills and smaller users took more than 500,000 tonnes a year1. In 2025, total US use of fluorspar was about 370,000 tonnes3.
Why this element
Fluorine forms many stable compounds. USGS names its small atomic size, its strong pull on electrons and its high reactivity. These let it form a wide variety of stable compounds1. Fluorine pulls electrons more strongly than any other element4.
Compounds of fluorine and carbon are very stable and can be adapted to many uses1. New uses for them continue to be found1. The same stability means some of these chemicals stay in the environment for a long time6.
Aluminum smelters need aluminum fluoride and cryolite1. In electrolytic aluminum production, an EU study says fluorspar cannot be replaced2.
In batteries, a fluorine plastic called PVDF binds the cathode and coats the separator in lithium-ion cells1. The US Department of Energy also says fluorine compounds are used in lithium-ion batteries7.
What could replace it
In steelmaking, other fluxes can replace fluorspar. They include aluminum smelting dross, borax, calcium chloride, iron oxides, manganese ore, silica sand and titanium dioxide3. An EU study says these come with a loss of performance2.
For chemicals, the fluorine can come from somewhere else. Fluorosilicic acid from phosphate plants has been used instead of fluorspar to make aluminum fluoride and hydrogen fluoride3. In aluminum smelting itself there is no substitute.
In refrigeration, the industry is moving away from gases that warm the climate. Hydrocarbons such as propane are one option2. The EU study names hydrofluoroolefins (HFOs) as the most likely replacement for HFCs2. HFOs still contain fluorine. Fluoropolymers can sometimes be replaced by other plastics, stainless steel, ceramics or aluminum, but these may perform less well2.
Where demand is going
In its yearbook for 2022, USGS reported that, according to some analysts, demand for fluorspar would grow over the next 30 years. Most of the growth is expected from acid grade, for lithium-ion battery components1.
An EU study draws on Roskill (2020). It expects demand for the lower, metallurgical grade to fall in the next five to ten years, as steel uses less2. It expects battery electrolytes and electronics to grow fastest. But it does not expect them to pass refrigerants and other fluorocarbons2.
Laws may reduce some demand. The Kigali Amendment commits countries to cut production and use of HFC refrigerants by more than 80% by 20471. The EU plans to phase out HFCs by 20508. The EU study says future demand will depend on substitutes for fluorocarbons and on other sources of fluorine2.
Sources
- 1
U.S. Geological Survey, 2025. Fluorspar, in 2022 Minerals Yearbook (advance release) , pp. 26.1-26.4.
Grades, world end uses in 2022, prices, laws on fluorinated gases and PFAS, world review and outlook.
-
accounted for 51% of the global annual fluorspar consumption in 2022 ... accounted for 23% ... estimated to account for 19% ... accounted for the remaining 7%
-
accounted for 51% of the global annual fluorspar consumption in 2022 … accounted for 23% … estimated to account for 19% … accounted for the remaining 7%
-
where it was used as a fluxing agent to increase slag fluidity
-
included use in the manufacture of cement, ceramics, enamel, glass, and welding rod coatings
-
fluorspar use in such industries as steel and glass has declined because of product substitutions or changes in industry practices
-
In the late 1970s, the United States used more than 500,000 t/yr of fluorspar for these applications
-
These characteristics contribute to fluorine’s ability to form a wide variety of stable compounds
-
Fluorochemicals, particularly those containing carbon, are very stable and versatile
-
new applications continue to be developed
-
essential for primary aluminum smelting
-
is used as a cathode binder and separator coating
-
the base demand outlook for fluorspar is projected to increase during the next 30 years. Most of this growth is expected to be driven by the demand for acidspar to produce HF, for use mainly in the components of lithium-ion batteries
-
cut production and consumption of HFCs by more than 80% by 2047
-
- 2
SCRREEN2 (EU Horizon 2020 project), 2023. SCRREEN2 factsheets updates based on the EU factsheets 2020: Fluorspar , Overview; market; substitution; recycling; geology.
Grades, producers, trade by contract, substitutes and recycling rates of fluorspar, from the EU point of view.
-
accounting for approximately 40 to 48% of the annual global fluorspar consumption
-
In electrolysis-based aluminium production, fluorspar cannot be substituted
-
In the iron and steel making sector substitutes exist but come with a loss of performance
-
These alternative materials include hydrocarbons such as propane
-
Hydrofluoroolefins (HFOs) and mixtures based on HFOs are considered to be
-
Alternative materials for solid fluoropolymers include plastics, stainless steel, ceramics and aluminium
-
The assessment is based on an overall decrease in metspar demand from the steel industry
-
The fastest growing markets will be battery electrolytes and the electronics industry
-
the future demand for fluorspar will also depend on the development and use of fluorocarbon substitutes as well as alternative sources of fluorine
-
- 3
V. Londono, U.S. Geological Survey, 2026. Fluorspar, in Mineral Commodity Summaries 2026 , Salient statistics; World Mine Production and Reserves; World Resources.
World fluorspar production and reserves by country, US import prices and trade, 2021 to 2025.
-
Aqueous HF is the primary feedstock for the manufacture of virtually all fluorine-bearing chemicals, particularly refrigerants and fluoropolymers, and chemicals used in the processing of primary aluminum and uranium
-
HF was also used as a catalyst in the petrochemical industry and essential in the cleaning and etching process during semiconductor manufacturing
-
7 370
-
Aluminum smelting dross, borax, calcium chloride, iron oxides, manganese ore, silica sand, and titanium dioxide have been used as substitutes for fluorspar fluxes
-
FSA has been used as an alternative to fluorspar in the production of AlF3 and HF
-
- 4
Los Alamos National Laboratory, 2026. Fluorine, Periodic Table of Elements , History; Properties; Uses.
Name, isolation by Moissan, reactivity, and the start of large-scale production in the Second World War.
-
Fluorine is also used in city water treatment (at one part per million) and in toothpaste to prevent tooth decay
-
It’s the most electronegative element
-
- 5
T.S. Hayes, M.M. Miller, G.J. Orris and N.M. Piatak, U.S. Geological Survey, 2017. Fluorine, chap. G of Critical mineral resources of the United States (Professional Paper 1802) , pp. G1-G80.
Minerals, deposit types, history of US production, processing, environment and health.
-
for use in drinking water fluoridation
-
- 6
Chemical & Engineering News (American Chemical Society), 2023. 3M agrees to $10.3 billion PFAS settlement .
The 3M and DuPont-group settlements with US water suppliers over PFAS, June 2023.
-
the chemicals are slow to break down in the environment
-
- 7
U.S. Department of Energy (Federal Register vol. 88, no. 149), 2023. Notice of Final Determination on 2023 DOE Critical Materials List , Summary; table of critical materials for energy.
Fluorine is on the 2023 DOE list of critical materials for energy.
-
Fluorine-based compounds are used in lithium-ion batteries
-
- 8
European Commission, 2026. EU legislation to control F-gases .
The F-gas Regulation (EU) 2024/573 and its phase-out of HFCs by 2050.
-
In 2050 HFCs will be phased out in the EU
-