What we use nickel for
Where does it go, and why this element?
About two thirds of new nickel goes into stainless steel. The rest goes into batteries, plating, other steels and alloys. The IEA forecasts that world demand grows from about 3.5 million tonnes in 2025 to about 5.8 million tonnes in 2040.
Last updated 10 October 2026.
Where it goes
Stainless steel takes most of the new nickel. USGS gives these shares of primary nickel use in 2021, from Project Blue, a market research firm. Stainless steel took about 70%, batteries 9%, plating 7%, alloy steels and castings 6%, other alloys 6% and other uses 2%1.
The share of stainless steel is still large. The International Nickel Study Group (INSG) says that it took more than two thirds of primary nickel in 20252. On another page, the INSG says that the share grew from one third over three decades. It gives no year3.
Battery use grows faster. The International Energy Agency (IEA) gives 439,000 tonnes of nickel for electric vehicles in 2025, up from 222,000 tonnes in 2021. Other uses grew from 2,536,000 to 2,906,000 tonnes44. The IEA counts electric vehicles, battery storage and other clean energy technologies as clean energy uses. By its figures, these took 18% of all nickel in 2025, up from 11% in 20214.
Most of the nickel is used in Asia. The INSG reports that Asia used 87.8% of the world’s primary nickel in 20252.
Why this element
The INSG says that nickel resists corrosion and keeps its strength when hot, and that it mixes easily with many other metals55.
In stainless steel, nickel changes the structure of the crystals of the steel. The result is called austenitic steel. The most common type has 18% chromium and 8% nickel6. USGS notes that this type of steel is used where resistance to corrosion and toughness matter most6. The INSG names pots, pans and kitchen sinks as uses in the home5.
Other uses include these:
- Wires that heat toasters and electric ovens7.
- Copper-nickel pipes in plants that make fresh water from seawater7.
- Coins, such as the US five-cent piece, which is 25% nickel7.
- A catalyst that hardens vegetable oils7.
In lithium-ion batteries, nickel is in the cathode. More nickel stores more energy. USGS reports that cathode makers raised the share of nickel over time1.
What could replace it
In steel, USGS names stainless steels with less or no nickel, such as duplex grades. Nickel-free specialty steels are sometimes used instead of stainless steel in power plants and the petrochemical industry. Titanium alloys can replace nickel alloys where corrosion is a problem888.
In batteries, lithium iron phosphate (LFP) cathodes use no nickel. In 2021 they had about 26% of the battery market, by USGS figures1. In October 2021, Tesla said that it would use LFP batteries in all its standard-range cars1. The INSG reports that LFP had 80% of battery installations in China in 20252.
Where demand is going
The IEA gives about 3.5 million tonnes of world demand in 20254. In its stated policies scenario, it forecasts 5.8 million tonnes in 2040. Electric vehicles would then use 1.85 million tonnes44. These are forecasts. The IEA says that the move to LFP batteries makes its nickel forecast lower than in its report of the year before4.
For 2026, the INSG forecasts that use grows by 4.2%. It expects China to give most of the growth2.
Sources
- 1
U.S. Geological Survey, 2025. Nickel, in 2021 Minerals Yearbook (advance release) , Production; Consumption; World Review (Indonesia, China, Russia); Outlook.
World use shares in 2021, laterite and sulfide production, Class I and Class II nickel, Indonesia's smelters and the first HPAL plant, batteries.
-
on a global basis, stainless steel accounted for about 70% of primary nickel use; batteries, 9%; plating, 7%; alloy steels and castings, 6%; nonferrous alloys, 6%; and other applications, 2% (Project Blue Group Ltd., 2024)
-
On a global basis, stainless steel accounted for about 70% of primary nickel use; batteries, 9%; plating, 7%; alloy steels and castings, 6%; nonferrous alloys, 6%; and other applications, 2%
-
In efforts to increase energy density, cathode manufacturers have been increasing the proportion of nickel in the cathode
-
Consumption of lithium iron phosphate (LFP), which does not use any nickel, continued to grow in 2021. LFP cathodes accounted for an estimated 26% of all battery consumption in 2021
-
Tesla, Inc. (Austin, TX) announced that it would switch the batteries in all of its standard range vehicles to LFP chemistries
-
- 2
International Nickel Study Group (R. Ferreira, F. Pinto), 2026. The World Nickel Market in 2026 - Indonesia, the Influencer .
Production, use and market balance in 2025 and the forecast for 2026; Indonesia's quotas and ore price rules; sulfur supply; LME prices and stocks. First published in Stainless Steel World, June 2026.
-
the STS sector remains the dominant first-use market for primary nickel, accounting for more than two thirds of total consumption
-
representing 87.8% of global primary nickel usage in 2025
-
the technology held an 80% share of domestic installations in China
-
is forecast to expand a further 4.2% in 2026, with China once again driving the bulk of the absolute increase in both years
-
- 3
International Nickel Study Group, 2021. Production and Usage .
World nickel demand from 2000 to 2020, first uses, nickel pig iron, market balances and price history to 2021.
-
This use accounts for over two thirds of first use nickel up from one-third in the past three decades
-
- 4
International Energy Agency, 2026. Global Critical Minerals Outlook 2026 , Chapter 2, Outlook for nickel (pp. 145 to 154); Annex, nickel demand and supply tables (pp. 353 to 355); Chapter 1, pp. 33, 97, 98, 133.
Demand by use in 2021 and 2025, mined and refined supply by country, Indonesia's quotas and ore prices, sulfur costs, reserves, recycling, permits revoked in Raja Ampat, outlook to 2040.
-
electric vehicles 222 439
-
other uses 2 536 2 906
-
share of clean energy 11% 18%
-
global nickel demand rose by almost 3% in 2025 to 3.5 Mt
-
total demand 2 845 3 532 4 331 5 361 5 797 4 464 5 832
-
electric vehicles 222 439 909 1 449 1 448 989 1 851
-
the shift towards LFP chemistries moderates nickel demand relative to last year
-
- 5
International Nickel Study Group, 2026. What is Nickel? .
Properties of nickel and its uses in 2020.
-
high resistance to corrosion and oxidation, excellent strength and toughness at elevated temperatures
-
alloys readily with many other metals
-
for products in the home such as pots and pans, kitchen sinks, etc.
-
- 6
U.S. Geological Survey (P.H. Kuck), 2013. Nickel, in Metal Prices in the United States Through 2010 (Scientific Investigations Report 2012-5188) , Nickel (Ni), pp. 105 to 112.
The history of nickel production and prices from the 18th century to 2010, stainless steel, strikes, the start of LME trading.
-
with 18 percent chromium and 8 percent nickel being the most common composition. The nickel changes the crystal structure of stainless steel from body-centered cubic (ferritic) to face-centered cubic (austenitic)
-
Austenitic stainless steels are often used where corrosion resistance and toughness are of primary concern
-
- 7
Royal Society of Chemistry, 2026. Nickel - Element information, properties and uses .
Discovery, name, uses, biological role and history.
-
Nichrome is an alloy of nickel and chromium with small amounts of silicon, manganese and iron. It resists corrosion, even when red hot, so is used in toasters and electric ovens
-
A copper-nickel alloy is commonly used in desalination plants
-
The US five-cent piece (known as a ‘nickel’) is 25% nickel and 75% copper
-
Finely divided nickel is used as a catalyst for hydrogenating vegetable oils
-
- 8
U.S. Geological Survey (A.A. Stewart), 2026. Nickel, in Mineral Commodity Summaries 2026 , p. 1, Domestic Production and Use, Salient Statistics, Recycling; p. 2, Events, Trends, and Issues, World Mine Production and Reserves, World Resources, Substitutes, footnotes.
World mine production and reserves by country, LME prices, US production, recycling and imports, the market surplus, sea-floor deposits, substitutes.
-
Low-nickel, duplex, or ultrahigh-chromium stainless steels have been substituted for austenitic grades in construction
-
Nickel-free specialty steels are sometimes used in place of stainless steel in the power-generating and petrochemical industries
-
Titanium alloys can substitute for nickel or nickel-base alloys in corrosive environments
-