What we use dysprosium for

Where does it go, and why this element?

Almost all dysprosium goes into neodymium-iron-boron magnets. Up to about 11% dysprosium keeps them strong when hot, in electric car motors and wind turbines. Small uses are lamps, nuclear control rods and Terfenol-D. Magnet makers now use less dysprosium per magnet.

Last updated 14 October 2026.

Where it goes

Where it goes (World)
Magnets 100%
2008. World use of dysprosium oxide in 2008, 1,310 t in all, from a USGS report based on data from Bade (2010). Magnets are neodymium-iron-boron magnets. The report counts no other use. Smaller uses named by the RSC and Britannica are nuclear control rods, metal halide lamps, lasers and the alloy Terfenol-D. We found no newer world split1

The newest world split that we found is for 2008. In that year, neodymium-iron-boron magnets took all of the 1,310 tonnes of dysprosium oxide that the world used1. Dysprosium oxide was 5.0% of all the rare earth oxide in these magnets1.

The EU also gives magnets as the main and almost only use2. From 2016 to 2018, the EU used about 12 tonnes of dysprosium compounds a year, and 2 tonnes of metal and alloys, all in magnets2.

The magnets go into the motors of electric and hybrid cars, wind turbines and industrial motors2. A 55 kW car motor needs about 200 g of neodymium and 30 g of dysprosium, by an estimate that the EU quotes2.

The smaller uses are these34:

  • Metal halide lamps, which give an intense white light.
  • Control rods for nuclear reactors.
  • Lasers and phosphors.
  • Terfenol-D, an alloy that changes shape in a magnetic field.

The IEA says that these uses are small but significant5.

Why this element

  • Heat. A magnet of neodymium, iron and boron loses its strength when it gets hot. Dysprosium increases its resistance to demagnetization, also at high temperatures6. The EU says that up to 4% dysprosium by weight can raise the highest working temperature from 80 °C to 200 °C2. The DOE and the IEA give higher contents for 200 °C (next point). Motors and generators run hot, so most of their magnets need dysprosium6.
  • The hotter, the more. The DOE gives the dysprosium content of each magnet grade. A magnet for 80 °C needs less than 0.5%. A magnet for 150 °C, such as in wind generators and electric bicycles, needs about 4.2%. Magnets for 200 °C and 220 °C need 8.5% to 11%7. The DOE gives hybrid and electric car drives as an example of the hottest grades7. The IEA gives 8.5% to 11% heavy rare earths for strong motors in electric cars5.
  • Neutrons. Dysprosium absorbs neutrons well. A mix of dysprosium oxide and nickel goes into control rods for nuclear reactors. The RSC says that the material does not swell or contract under neutrons for long periods3.
  • Light. Dysprosium iodide in a discharge lamp gives a very intense white light3.
  • Change of shape. Terfenol-D is an alloy of terbium, dysprosium and iron. It changes shape in a magnetic field, and ship sonar systems and sensors use it3.

What could replace it

  • Terbium. Terbium does the same job in magnets. In 2011, the DOE called it the only known substitute in magnets, and said that it was even rarer and usually more expensive6.
  • Gadolinium. The IEA names gadolinium as a substitute for dysprosium in magnets5.
  • Less dysprosium per magnet. Makers can put the dysprosium only at the boundaries of the grains of the magnet. This is called grain boundary diffusion. By DOE account, it can halve the content of heavy rare earths7. The DOE adds that it suits smaller magnets better, and that patents limit its use7. The IEA says that the latest motor designs could need only about 2% heavy rare earths, but with lower performance5.
  • Magnets with none. In 2016, Daido Steel and Honda announced a hybrid car motor with a magnet free of heavy rare earths8. In 2018, Toyota announced a magnet with no terbium or dysprosium9. In 2022, the DOE said that Toyota did not yet use it in its hybrid cars, because of lower performance7.
  • Cooler motors. If a motor or generator runs cooler, its magnets need less dysprosium6. Other designs use no rare earth magnets at all, such as wind turbines with induction generators7.

Where demand is going

For world demand in 2024, see the production chapter. The IEA says that the main driver of growth is the use of dysprosium and terbium in magnets5.

Electric cars and wind turbines need more magnets, but makers put less dysprosium into each magnet. Adamas Intelligence, a market research company, expected the dysprosium content of magnets to fall from 2.3% in 2014 to 1.9% in 20202.

Forecasts of demand:

  • In 2011, the DOE made a forecast for one of its scenarios. Clean energy would take 52% of world dysprosium demand in 2025, up from 11% in 2010. For this, world production of dysprosium oxide would need to more than double6.
  • In 2019, Adamas Intelligence forecast that demand would exceed production by more than 300 tonnes in 2030. This is the dysprosium for about 3 million car motors2.
  • In 2022, the DOE forecast US demand for dysprosium in products. It would grow from 600 tonnes in 2020 to 1,900 tonnes in 2030. This was for a scenario of fast decarbonization, with current technology and no substitution7.

Sources

  1. 1

    U.S. Geological Survey (Thomas G. Goonan), 2011. Rare Earth Elements—End Use and Recyclability (Scientific Investigations Report 2011–5094) , Table 1 (dysprosium oxide column); section on neodymium-iron-boron magnets and figure 8.

    World use of dysprosium oxide by end use in 2008. Based on data from Bade (2010).

    • created 100 percent of the consumption of dysprosium oxide (1,310 t)
    • dysprosium oxide, 5.0 percent
  2. 2

    European Commission (G.A. Blengini and others), 2020. Study on the EU's list of Critical Raw Materials (2020): Factsheets on Critical Raw Materials , Chapter 21, rare earth elements: sections 21.1.1.2, 21.2.2.2, 21.2.4.3, 21.3.3.2, 21.4.2.2, and the sections on magnets and recycling.

    Crust abundance, minerals, uses, demand forecast, prices from 2003 to 2019, EU use and trade, and recycling of magnet scrap.

    • The main and almost exclusive use of dysprosium is in permanent magnets NdFeB
    • EU consumed in average around 12 tonnes per year of dysprosium compounds (oxide
    • content) and 2 tonnes of dysprosium metals and interalloys between 2016-2018 and used
    • main finished products driving dysprosium consumption for magnets include new
    • generations of wind turbines, industrial motors, etc.
    • for a 55-kW motor, 0.65 kg of Nd–Dy–Co–Fe–B alloy is required, which represents 200 g of neodymium (3.6 g/kW) and 30 g of dysprosium (0.55 g/kW) per motor
    • NdFeB alloyed with up to 4 wt% dysprosium can dramatically increase the maximum operating temperature from 80oC up to 200 oC
    • Adamas expects
    • the content of dysprosium in magnets to drop from 2.3% in 2014 to 1.9% in 2020
    • will exceed global annual production by upwards of 300 tonnes
    • equal to the amount of material needed for production of approximately 3.0 million
  3. 3

    Royal Society of Chemistry, 2026. Dysprosium - Element information, properties and uses , Sections Uses, Biological role, Natural abundance, History; podcast transcript by Simon Cotton.

    Discovery, name, uses in magnets, lamps, control rods and Terfenol-D, biological role, minerals and preparation of the metal.

    • Dysprosium iodide is used in halide discharge lamps
    • A dysprosium oxide-nickel cermet (a composite material of ceramic and metal) is used in nuclear reactor control rods. It readily absorbs neutrons, and does not swell or contract when bombarded with neutrons for long periods.
    • The salt enables the lamps to give out a very intense white light
    • It is a magnetostrictive material, meaning that when it is put into a magnetic field, it changes shape, reversibly. This has found applications in ships’ sonar systems
    • in all sorts of sensors and transducers
  4. 4

    Britannica Editors, Encyclopaedia Britannica, 2026. dysprosium .

    Properties, discovery, mineral sources, isotopes, separation, metal production and uses. Read with Firecrawl; the site refused a script.

    • Dysprosium is used in control rods for
    • Making laser materials and phosphor activators
  5. 5

    International Energy Agency, 2026. Global Critical Minerals Outlook 2026 , Executive summary; chapter 1 (export controls); chapter 2, rare earth elements (demand, heavy rare earths in magnets); chapter 3 (share of rare earths in the price of magnets).

    Prices of dysprosium in Europe and China, exports after the controls of 2025, the dysprosium content of magnets and its share of the magnet price.

    • dysprosium and terbium, continue to play small but
    • significant roles in phosphors, displays, medical equipment, nuclear
    • high‑performance EV traction motors contain around 8.5-11% of
    • HREEs by weight
    • a substitute for dysprosium in magnets
    • the latest designs could have much lower
    • content of around 2%, but with performance trade-offs
    • but the strongest driver of their demand
    • growth has been their use as additives to enhance the performance
  6. 6

    U.S. Department of Energy, 2011. Critical Materials Strategy , Executive summary; chapter 2 (dysprosium, table 2-2); chapter 3, footnote 31 (price rises); chapter 4, table 4-2 and figure 4-4 text; appendix, element page for dysprosium.

    Dysprosium as the most critical element of 2010, its content in magnets, its price rise to 2011, world supply in 2010 and the forecast of demand.

    • Dysprosium is
    • added to increase the value of intrinsic coercivity, or resistance to demagnetization
    • which is generally required for all PMs
    • used in motors or generators
    • The only known substitute in PMs is terbium, which is even rarer and historically
    • more expensive
    • need for dysprosium by lowering operating temperatures of applications
    • global dysprosium demand, increasing from 11% in 2010 to 52% in 2025 under Trajectory C
    • global production of dysprosium oxide needs to more than double
  7. 7

    U.S. Department of Energy, 2022. Rare Earth Permanent Magnets: Supply Chain Deep Dive Assessment , Section 2 (rare earth supply, magnet grades, table 2); section 3.2.1 (demand projections, price volatility, substitution).

    Dysprosium content of magnet grades, where heavy rare earths are mined and separated, projected US demand, prices and ways to use less dysprosium.

    • <0.5% 1.4% 2.8% 4.2% 6.5% 8.5% - 11% 8.5% - 11%
    • SH 150 4.2% 25.8% Wind power generators, electric bicycles
    • Hybrid and electric traction drives, high temp. motors and generators
    • total HRE content can be
    • halved by the use of processes such as the grain boundary diffusion (GBD) process
    • This
    • process is more pertinent to smaller magnets, [54] however, and is subject to intellectual property constraints.
    • though it is not
    • currently being used in their HEVs due to lower performance
    • wind turbines that use induction generators in place of magnets
    • of 1.9kt for Dy (up from 0.6kt)
    • is based on simple calculation assuming current technology with no substitution
  8. 8

    Honda Motor Co., Ltd. and Daido Steel Co., Ltd., 2016. Daido Steel and Honda Adopt World's First Hybrid Vehicle Motor Magnet Free of Heavy Rare Earth Elements .

    The companies' press release on a hybrid car motor magnet with no dysprosium or terbium.

    • the world’s first companies to achieve practical application of a hot deformed neodymium magnet containing no heavy rare earth
  9. 9

    Toyota Motor Corporation, 2018. Toyota Develops New Magnet for Electric Motors Aiming to Reduce Use of Critical Rare-Earth Element by up to 50% .

    The company's press release on a heat-resistant magnet with no terbium or dysprosium.

    • The newly developed magnet uses no terbium (Tb) or dysprosium (Dy)