What we use argon for

Where does it go, and why this element?

Most argon goes into steelmaking and welding, where it keeps air away from hot metal. Chip factories, lamps, double glazing and laboratories use the rest. Argon is used because it does not react and costs little.

Last updated 5 October 2026.

Where it goes

Where it goes (China)
Steelmaking 46%
Welding 21%
Electronics 15%
Lighting 10%
Other 8%
2015. DERA, after Suresh et al. (2016). China used about 1.74 billion cubic meters in 2015, the largest national demand DERA reports. No world split is published. In the United States in 2015, welding took 47% and steel 29%1

We found no world split of argon uses. DERA reports national splits from a 2016 market study (Suresh et al.). China, the largest user, took about 1.74 billion cubic meters in 2015. Of this, 46% went to steelmaking, 21% to welding, 15% to electronics, 10% to lighting and 8% to other uses1.

The split was different in other countries.

  • In the United States in 2015, welding took 47% and steel 29%. Electronics and solar cells took 12%, lighting 3% and other uses 9%1.
  • In Japan in 2015, 30% went to metal processing (mostly welding), 23% to primary metals (mostly steel) and 17% to electronics1.

In steelmaking, argon is blown into liquid steel to stir it and to carry out unwanted gases such as nitrogen, carbon monoxide and hydrogen1. Stainless steel is made by argon-oxygen decarburization (blowing a mix of argon and oxygen into the melt to remove carbon). This uses about 20 cubic meters of argon per tonne of steel1.

Smaller uses include the gas between the panes of double glazing, lamps, analysis instruments and food packaging. Winemakers and food packers use argon as the food additive E 9381.

Why this element

Argon does not react, even with hot metal. In welding and casting it shields the melt from the oxygen, nitrogen and water in the air1. This matters most for metals such as aluminum, magnesium and titanium1. The RSC names titanium production as a use2.

Argon is also cheap. It is almost 1% of air, so a plant that makes oxygen gets it as a by-product. Helium does the same jobs in welding, but welders mostly use argon because it costs less1.

Argon carries heat poorly. The RSC gives its thermal conductivity as 17.72 milliwatts per meter-kelvin, against 26 for air2. So argon between the panes of double glazing keeps more heat in. DERA calls it by far the most important gas for this use, because of this property and its low price1.

In chip making, argon protects many process steps. Silicon crystals for chips are grown under argon1. In old incandescent lamps, a mix of 93% argon and 7% nitrogen slowed the loss of the filament1.

What could replace it

Other gases can replace argon in most uses, but they cost more or work less well.

  • Welding. Helium works as a shield gas and gives more heat to the weld, but it costs more1. In metal active gas welding, reactive gases such as carbon dioxide do part of the job1.
  • Stainless steel. Some plants use nitrogen or compressed air instead of argon at the start of decarburization, to save money1.
  • Double glazing. Krypton insulates better, but most makers use argon because it is much cheaper1.

The more common substitution goes the other way. DERA describes argon as a cheap substitute for helium in many uses1.

Where demand is going

DERA reports that argon demand roughly follows world steel production1. Demand outside steel has also grown, from chip making and from users who replaced helium with argon after the helium shortage of 2011 to 20131. So the large gas companies try to add argon capacity1.

The authors of the market study cited by DERA forecast that demand in China would grow by 4.5% a year after 20151. We found no newer published forecast.

In China in 2024, market analysts linked changes in argon demand mostly to stainless steel and to silicon wafers for solar cells. In October 2024, more stainless steel output raised argon demand3. In November, wafer makers ran at low output and gave prices no support4.

Science projects can need large amounts at one time. The DUNE neutrino experiment in the United States plans four detector modules5. Fermilab gives 17,500 tonnes of liquid argon for each module6. DERA gives about 69,600 tonnes for all four, delivered over four years1. The cooling plant ordered in 2023 is for the first two modules6. The detectors are a mile underground in South Dakota7. Fermilab plans about five 18-ton truck deliveries a day while the detectors fill5.

Sources

  1. 1

    Harald Elsner, Deutsche Rohstoffagentur (DERA) at the Federal Institute for Geosciences and Natural Resources (BGR), 2018. Edelgase – Versorgung wirklich kritisch? (Noble gases: is supply really critical?) , Summary pp. 11-12; Tables 1-3 pp. 17-20; section 3.1.3 p. 26; 3.2.3 pp. 43-46; 3.5 pp. 53-54; 4.3 pp. 68-70; 5.3 pp. 84-86; 6.3 p. 98; 7.3 p. 102; Annex: China, Germany (Table 26 p. 144), Japan, USA (Table 36 p. 187).

    World argon output, plants, demand by country and use, German production and value, and US capacity by company, in German. Many figures come from the market study Suresh et al. (2016).

    • Die Nachfrage verteilte sich im Jahr 2015 zu 46 % auf die Stahlproduktion, zu 21 % auf Schutzgas zum Schweißen, zu 15 % auf den Elektronikbereich, zu 10 % auf den Beleuchtungsbereich und zu 8 % auf andere Verwendungsbereiche
    • In den USA verteilte sich die Nachfrage nach Argon im Jahr 2015 zu rund 47 % auf Schutzgas zum Schweißen, zu 29 % auf die Stahlproduktion, zu 12 % auf die Elektronikindustrie/Halbleiterindustrie/Solarzellenproduktion, zu 3 % auf die Herstellung von Beleuchtungskörpern und zu 9 % auf andere Bereiche
    • zu 30 % zur Verarbeitung von Metallprodukten (Schutzgas beim Schweißen), zu 23 % in der Primärproduktion von Metallen (Stahlproduktion), zu 17 % im Elektronikbereich
    • Unter hohem Druck eingeblasenes Argon dient einerseits zum Durchmischen des flüssigen Stahls
    • Pro Tonne Stahl werden rund 25 m3 O2 und 20 m3 Ar verbraucht
    • Bei der Weinherstellung und der Verpackung von Lebensmitteln dient Argon in Form des Lebensmittelzusatzstoffes E 938 als Treib- und Schutzgas
    • Argon schützt also die heiße Schmelze vor dem Sauerstoff, dem Stickstoff und der Feuchte der Luft
    • z. B. Aluminium, Magnesium, Chrom, Vanadium, Silizium, Titan oder Molybdän
    • Aus Kostengründen wird zum Schweißen meist Argon eingesetzt, seltener reines Helium
    • Wegen seiner geringen Wärmeleitfähigkeit und seines relativ niedrigen Preises ist Argon seit langem das mit weitem Abstand wichtigste Füllgas zwischen Isolierglasscheiben
    • Auch die Siliziumeinkristalle für die spätere Halbleiterproduktion werden bereits in einer Schutzgasatmosphäre aus Argon gezüchtet
    • im Verhältnis von 93 % Ar und 7 % N2 gefüllt
    • Dabei wird das verhältnismäßig teure Helium aufgrund seiner besseren Wärmeleitfähigkeit verwendet
    • (MAG-Schweißen) mit reaktionsfreudigen Gasen (CO2, O2, N2, H2)
    • zu Beginn des Prozesses mitunter statt Argon auch Stickstoff oder einfach nur Druckluft eingesetzt
    • In der Isolierglasscheibenproduktion wird als Füllgas statt dem hocheffizienten Krypton meist das wesentlich günstigere Argon verwendet
    • Generell ist Argon in vielen Anwendungen günstiges Substitut für Helium
    • korreliert die Nachfrage nach diesem Edelgas in etwa mit der weltweiten Stahlproduktion
    • da diese Helium verstärkt durch Argon substituieren
    • weswegen die großen multinationalen Gasunternehmen versuchen, ihre Argonkapazitäten zu maximieren
    • wobei das Nachfragewachstum in den kommenden Jahren bei 4,5 %/a liegen soll
    • über einen Zeitraum von vier Jahren insgesamt 69.600 t flüssiges Argon benötigt
  2. 2

    Royal Society of Chemistry, 2026. Argon - Element information, properties and uses .

    Discovery, name, origin in the air, uses and the first argon compound.

    • It is used in this way for the production of titanium and other reactive elements
    • Thermal conductivity of argon at room temperature (300 K) is 17.72 mW
    • whereas for air it is 26 mW
  3. 3

    China Gases Network (气体网), on the IG China exhibition site, with data from Zhuochuang Information (卓创资讯), 2024. 10月液氩价格飞涨 11月涨势或将放缓 (Liquid argon prices soared in October; the rise may slow in November) .

    National monthly average price of liquid argon in China, October 2024; demand from stainless steel; argon recovery units shut in Inner Mongolia. A trade website.

    • 不锈钢生产积极性提升,带动了氩气需求的增长
  4. 4

    China Gases Network (气体网), on the IG China exhibition site, with data from Zhuochuang Information (卓创资讯), 2024. 11月液氩价格先扬后抑 12月市场偏弱为主 (Liquid argon prices rose then fell in November; December market mostly weak) .

    National monthly average price (693 yuan per tonne) and output (397,000 tonnes) of liquid argon in China, November 2024. A trade website.

    • 硅片企业开工维持低位,仍以消化库存为主,难以对价格形成支撑
  5. 5

    Fermi National Accelerator Laboratory (LBNF/DUNE), 2026. Cryostats and cryogenics .

    Liquid argon for the DUNE far detector and how it will be delivered.

    • The DUNE far detector will comprise four cryostats
    • LBNF plans for about five 18-ton deliveries by truck per day at the far detector
  6. 6

    Fermi National Accelerator Laboratory, 2023. Contract awarded for acquisition of large cryogenic system for DUNE detectors in South Dakota .

    17,500 tonnes of liquid argon per DUNE far detector module; the cooling plant for the first two modules.

    • 17,500 metric tons of liquid argon in each of the large cryostats
    • will provide the cooling for two large liquid-argon neutrino detectors
  7. 7

    Fermi National Accelerator Laboratory (LBNF/DUNE), 2026. Overview .

    The site of the DUNE far detector in South Dakota.

    • massive particle detector modules to be installed a mile beneath the surface at Sanford Underground Research Facility in South Dakota