What we use rhenium for
Where does it go, and why this element?
About 80% of rhenium goes into nickel superalloys for jet engine turbine blades, where it adds strength above 1,000 °C. About 15% goes into platinum-rhenium catalysts that make high-octane gasoline. Engine makers found no easy substitute; catalysts have some.
Last updated 14 October 2026.
Where it goes
- Other
- Catalysts
- Superalloys
Show the numbers
| Year | Superalloys | Catalysts | Other |
|---|---|---|---|
| 1995 | 70% | 20% | 10% |
| 1999 | 55% | 35% | 10% |
| 2001 | 50% | 40% | 10% |
| 2003 | 50% | 40% | 10% |
| 2006 | 60% | 20% | 20% |
| 2008 | 70% | 20% | 10% |
| 2013 | 70% | 20% | 10% |
| 2017 | 80% | 15% | 5% |
| 2025 | 80% | 15% | 5% |
USGS estimates that superalloys took 80% of rhenium in the United States in 2025, and petroleum-reforming catalysts 15%1. For the world in 2012, USGS gave superalloys 83% (45 tonnes), catalysts about 10% and other uses 7%10. These shares leave out about 15 tonnes a year recycled from spent catalysts10.
The share of superalloys grew. In the USGS estimates, catalysts took 20% of US use in 1995 and superalloys 70%2. For 2003, USGS gave catalysts 40% and superalloys 50%5. From 2017, it gives superalloys 80% and catalysts 15%9. These are rounded estimates, so small changes may not be real.
The other uses are small. Alloys of rhenium with tungsten and molybdenum go into electrical contacts, heating elements, vacuum tubes and X-ray tubes and targets10. USGS also lists crucibles, electromagnets, thermocouples and semiconductors1.
Why this element
Rhenium melts at 3,180 °C. Only carbon and tungsten melt at higher temperatures10. In some nickel superalloys, rhenium makes the metal stronger above 1,000 °C1. Turbine blades made of these alloys allow engines with closer tolerances, more thrust and better efficiency10. The blades typically contain 3% rhenium, and some contain 6%10.
In oil refineries, platinum-rhenium catalysts make high-octane hydrocarbons for gasoline without lead1. The Royal Society of Chemistry says that rhenium catalysts strongly resist poisoning11.
What could replace it
In jet engines, there is no simple substitute. USGS wrote in 2017 that it has been hard to make alloys with less rhenium for jet engines without a loss in performance10. Argus reported in 2024 that the only option in superalloys is to use less rhenium12. A trader wrote in 2014 that some lower-thrust engines used less rhenium or none in some alloys. The trader wrote that the loss of fuel efficiency was made up in other ways13. Lipmann Walton wrote that GE had promoted ceramic matrix composites as a replacement for nickel alloys in the hot part of engines13.
In catalysts, one substitute is in commercial use: a catalyst with iridium and tin1. Gallium, germanium, indium, selenium, silicon, tungsten and vanadium are being tested1.
For the small uses, USGS lists these substitutes1:
Where demand is going
Medical implants are a new use. In 2019, the US Food and Drug Administration cleared the first implant made of a molybdenum-rhenium alloy, a spinal screw14. Argus reported forecasts of 10 to 20 tonnes of medical demand over the next two years, from different sources12.
Aircraft engines in China are a second driver. China imported large amounts of rhenium in 2023 and 2024. Argus reported that this came at the same time as China’s push to develop its own aircraft engines12. USGS expected that higher prices would make recycling of superalloys pay better1.
Sources
- 1
U.S. Geological Survey (Désirée E. Polyak), 2026. Rhenium, in Mineral Commodity Summaries 2026 , Pp. 1-2: production and use, salient statistics, recycling, import sources, events, world mine production and reserves, resources, substitutes.
US and world production, prices from 2021 to 2025, end uses, recycling, the 2025 US critical minerals list, reserves.
-
The major uses of rhenium were in superalloys used in high-temperature turbine engine components and in petroleum-reforming catalysts, representing an estimated 80% and 15%, respectively, of end uses.
-
Rhenium alloys were used in crucibles, electrical contacts, electromagnets, electron tubes and targets, heating elements, ionization gauges, mass spectrographs, metallic coatings, semiconductors, temperature controls, thermocouples
-
Rhenium improves the high-temperature (>1,000 degrees Celsius) strength properties of some nickel-base superalloys.
-
Bimetallic platinum-rhenium catalysts were used in petroleum reforming to produce high-octane hydrocarbons, which are used in the production of lead-free gasoline.
-
one such application using iridium and tin has achieved commercial success
-
Other metals being evaluated for catalytic use include gallium, germanium, indium, selenium, silicon, tungsten, and vanadium.
-
cobalt and tungsten for coatings on copper X-ray targets, rhodium and rhodium-iridium for high-temperature thermocouples, tungsten and platinum-ruthenium for coatings on electrical contacts, and tungsten and tantalum for electron emitters
-
As rhenium prices increased, recycling of rhenium-bearing superalloys was expected to become more financially attractive.
-
- 2
U.S. Geological Survey and U.S. Bureau of Mines, 1996. Rhenium, in Mineral Commodity Summaries 1996 , Domestic Production and Use.
US end-use shares in 1995.
-
The major uses of rhenium were in petroleum-reforming catalysts and in high-temperature superalloys used in jet engine components, representing about 20% and 70%, respectively, of the total demand.
-
- 3
U.S. Geological Survey, 2000. Rhenium, in Mineral Commodity Summaries 2000 , Domestic Production and Use.
US end-use shares in 1999.
-
The major uses of rhenium were in petroleum-reforming catalysts and in high-temperature superalloys used in jet engine components, representing about 35% and 55%, respectively, of the total demand.
-
- 4
U.S. Geological Survey, 2002. Rhenium, in Mineral Commodity Summaries 2002 , Domestic Production and Use.
US end-use shares in 2001.
-
The major uses of rhenium were in petroleum-reforming catalysts and in high-temperature superalloys used in turbine engine components, representing about 40% and 50%, respectively, of the total demand.
-
- 5
U.S. Geological Survey, 2004. Rhenium, in Mineral Commodity Summaries 2004 , Domestic Production and Use.
US end-use shares in 2003.
-
The major uses of rhenium were in petroleum-reforming catalysts and in high-temperature superalloys used in turbine engine components, representing about 40% and 50%, respectively, of the total demand.
-
- 6
U.S. Geological Survey, 2007. Rhenium, in Mineral Commodity Summaries 2007 , Domestic Production and Use.
US end-use shares in 2006.
-
The major uses of rhenium were in petroleum-reforming catalysts and in superalloys ... representing an estimated 20% and 60%, respectively, of the end use
-
- 7
U.S. Geological Survey, 2009. Rhenium, in Mineral Commodity Summaries 2009 , Domestic Production and Use.
US end-use shares in 2008.
-
The major uses of rhenium were in petroleum-reforming catalysts and in superalloys ... representing an estimated 20% and 70%, respectively, of the end use
-
- 8
U.S. Geological Survey, 2014. Rhenium, in Mineral Commodity Summaries 2014 , Domestic Production and Use.
US end-use shares in 2013.
-
The major uses of rhenium were in petroleum-reforming catalysts and in superalloys ... representing an estimated 20% and 70%, respectively, of end uses
-
- 9
U.S. Geological Survey, 2018. Rhenium, in Mineral Commodity Summaries 2018 , Domestic Production and Use.
US end-use shares in 2017.
-
The major uses of rhenium were in superalloys used in high-temperature turbine engine components and in petroleum-reforming catalysts, representing an estimated 80% and 15%, respectively, of end uses.
-
- 10
U.S. Geological Survey (David A. John, Robert R. Seal II and Désirée E. Polyak), 2017. Rhenium, chapter P of Critical Mineral Resources of the United States (Professional Paper 1802) , Pp. P1-P49: abstract, introduction, uses, geology, deposits, production, environment, health.
Crustal abundance, discovery, uses in 2012, geology, deposits, recovery from flue dust, environment and health.
-
Approximately 83 percent (45 metric tons) of rhenium from primary sources was used in making
-
New types of catalysts in the petrochemical industry accounted for about an additional 10 percent (5 metric tons). The remaining 7 percent
-
An additional 15 metric tons of rhenium is recycled each year from spent catalysts and is not included in the world consumption total
-
primarily in the form of tungsten-rhenium and molybdenum-rhenium alloys … was used in a variety of other applications, including in the manufacture of electrical contact points, flashbulbs, heating elements, vacuum tubes, and X-ray tubes and targets
-
The 3,180 °C melting point of rhenium is the third highest melting point of all the elements; only carbon (3,500 °C) and tungsten (3,422 °C) have higher melting points.
-
The high-temperature properties of rhenium allow turbine engines to be designed with closer tolerances, thus enabling increased thrust and higher operating efficiency.
-
typically contain 3 percent rhenium, although some alloys contain 6 percent rhenium
-
it has proven difficult to develop alloys with lower rhenium content for use in jet engines without a loss in performance
-
- 11
Royal Society of Chemistry, 2026. Rhenium - Element information, properties and uses , Sections Uses and properties, Biological role, Natural abundance, History.
Name, discovery by Ogawa and by Noddack and Tacke, uses, biological role.
-
Rhenium catalysts are extremely resistant to poisoning (deactivation)
-
- 12
Argus Media (Cristina Belda), 2024. Rhenium deficit persists, could boost recycling .
Prices in 2024, Chinese imports, medical demand, the record price of 2008, recycling, substitutes. Published 28 October 2024.
-
But in superalloys, the only possibility now is to use less rhenium in the alloys, which is a less efficient production process.
-
Demand from the medical sector is projected in a range of 10-20t over the next two years, depending on the source.
-
The increased imports coincide with the ramp-up in development of China’s aviation engine technology
-
- 13
Lipmann Walton & Co (metal trader), 2014. Pratt & Whitney/ Molymet write largest deal in rhenium history .
A trader's account of the 2014 Pratt & Whitney contract with Molymet, world supply and the other producers.
-
it has been possible, in engineering terms, to get away with the use of less rhenium or no rhenium in some alloys within the HPT (High Pressure Turbine) for lower thrust engines on the wing of high frequency planes – this loss of fuel efficiency was compensated for in other ways
-
GE then also made much of the potential for CMCs (Ceramic Matrix Composites) to replace traditional nickel base alloy for the hot section of the engine
-
- 14
BONEZONE (Carolyn LaWell), 2019. FDA Clears First Implant with Molybdenum Rhenium Superalloy .
FDA 510(k) clearance of the MiRus Europa pedicle screw, the first implant made of a molybdenum-rhenium alloy. Published 5 April 2019. A trade magazine for orthopaedic device makers.
-
MiRus received FDA 510(k) clearance for Europa™, a pedicle screw made with the company’s proprietary MoRe® molybdenum rhenium superalloy.
-