What we use terbium for

Where does it go, and why this element?

Terbium went mostly into green phosphors for lamps and screens: 89% of world use in 2008. By IEA figures, magnets took at least 55% of terbium demand in 2024. Small additions keep neodymium magnets strong when hot, as in electric car motors. Dysprosium can replace it in magnets.

Last updated 14 October 2026.

Where it goes

Where it goes (World)
Phosphors 89%
Neodymium magnets 11%
2008. World use of terbium oxide in 2008, 467 t, from a USGS report based on Bade (2010). This is the newest split by use with numbers in text that we found. Since then, the demand for lamp phosphors has fallen and the demand for magnets has grown (see the uses chapter)1

In 2008, the world used 467 tonnes of terbium oxide. Phosphors took 414 tonnes, or 89%, and neodymium magnets 53 tonnes1. This is the newest world split by use, with numbers in text, that we found. Phosphors are the materials that give off colored light in fluorescent lamps and in older TV screens.

The EU reported in 2020 that lighting made up 68% of terbium uses2. For 2024, the IEA gives a world demand of about 600 tonnes3. For terbium, dysprosium, gadolinium and samarium together, the IEA says that magnets made up 55% to 95% of the demand of each element3. So magnets took at least 55% of terbium demand. The IEA gives the exact share for terbium only in a chart, so we do not give it. In 2026, the IEA named magnets as the strongest driver of the growth in terbium demand. Small amounts still go into phosphors, displays, medical equipment, nuclear reactors and metallurgy4.

We found no source with the shares by use for three or more years on the same basis. So we show no chart of uses over time.

Why this element

Magnets. The DOE says that sintered neodymium-iron-boron magnets are the strongest magnets on the market5. Makers add dysprosium or terbium, mainly to sintered magnets, so that the magnets resist demagnetization above 120 °C5. The DOE gives additions of 0.5% to 11% of dysprosium or terbium5. In 2011, the DOE named magnets for wind turbines and electric vehicles among the uses of terbium and four other rare earths6. The IEA says that the magnets in high-performance electric car motors hold about 8.5% to 11% heavy rare earths by weight4.

Phosphors. Terbium ions give off a bright green light when they are excited. Louise Natrajan says that the human eye is very sensitive to green, so small amounts are easy to see7. Britannica names green phosphors in fluorescent lamps, computer monitors and cathode-ray TV screens8. The EU says that terbium oxide is 4% of lamp phosphors2. Terbium has been used in medical X-rays to give the same image quality with a much shorter exposure7.

Terfenol-D. This alloy of terbium, dysprosium and iron changes its length in a magnetic field. The effect is called magnetostriction8. Britannica names actuators, sonar systems and pressure sensors as uses8. In 2013, USGS named ETREMA Products in Ames, Iowa, as the only US producer of the alloy9.

What could replace it

In magnets, dysprosium and terbium can replace each other5. The EU says that magnet makers prefer dysprosium because it is cheaper2. The DOE says that a process called grain boundary diffusion can halve the total content of heavy rare earths in a magnet5. The IEA says that the latest motor designs could have about 2% heavy rare earths, with some loss of performance4. Makers also work on better motor cooling and design, to use less dysprosium or terbium4.

In lighting, LEDs take the place of fluorescent lamps. A 2012 forecast that the EU cites put LEDs at over 60% of the lighting market in 20202. According to the EU, LEDs hold about 1,000 times less rare earths than fluorescent lamps2. Around 2011, Rhodia planned to use less terbium by changing its phosphors10.

USGS says that light rare earths can replace heavy rare earths in several uses, but that substitutes are generally less effective11.

Where demand is going

The EU expected terbium demand to drop, because lighting would need fewer rare earths. By a forecast of Guyonnet and others (2015), these needs would fall by at least 65% from 2015 to 20302. Demand for magnets grows. The IEA says that world demand for the four magnet rare earths, terbium among them, has doubled since 20154.

The IEA gives a forecast in its Stated Policies Scenario of 2026. It expects demand for the magnet rare earths to grow by a quarter from 2025 to 2030, to almost 120 kilotonnes. It expects growth of over 80% by 2050, to 170 kilotonnes4. This forecast is for the four elements together, not for terbium alone.

Sources

  1. 1

    U.S. Geological Survey (Thomas G. Goonan), 2011. Rare Earth Elements—End Use and Recyclability (Scientific Investigations Report 2011–5094) , Table 2 (terbium oxide row); sections on phosphors and neodymium-iron-boron magnets.

    World use of terbium oxide in 2008 by end use, based on data from Bade (2010).

    • Terbium oxide ... 53 ... 414 ... 467
    • Terbium oxide … 53 … 414 … 467
    • 89 percent of the consumption of terbium oxide (414 t)
  2. 2

    European Commission (G.A. Blengini and others), 2020. Study on the EU's list of Critical Raw Materials (2020): Factsheets on Critical Raw Materials , Chapter 21, rare earth elements: sections 21.1.1.11, 21.2.2.10, 21.2.4.12, 21.3.3.11, 21.4.2.11, and the sections on prices and phosphor recycling.

    Crust abundance, minerals, uses, demand outlook, prices from 2002 to 2019, EU use and trade, separation at La Rochelle, and lamp recycling.

    • (this industry is currently representing 68% of terbium applications)
    • It represents 4% of the composition of luminophores used for lighting
    • However, Dy is favoured over Tb because it is cheaper
    • LED lighting penetration is projected to be around 40% in 2016 and over 60% in 2020
    • The content of rare earths (including Tb) in LEDs is much lower than in fluorescent lamps (1,000 times lower)
    • The demand of terbium is likely to drop in the future because of the reduction of rare earth needs for the lighting industry
    • This reduction is expected to amount to at least 65% between 2015 and 2030 (Guyonnet et al., 2015)
  3. 3

    International Energy Agency, 2025. Global Critical Minerals Outlook 2025 , Rare earth elements section: box 2.2 on China's export controls and the figure on demand for the controlled elements in 2024 (p. 165); US tariffs; Japan's policy support.

    World demand for terbium in 2024, the share of magnets in demand, US tariffs on terbium oxide, Myanmar's share of heavy rare earth mining, and a Japanese investment for terbium in France.

    • Terbium 0.6 kt
    • For four out of the seven elements (Sm, Gd, Tb, Dy) placed under the export controls, 55-95% of demand in 2024 was driven by their use in magnet manufacturing
  4. 4

    International Energy Agency, 2026. Global Critical Minerals Outlook 2026 , Executive summary; Chapter 1, rare earth export controls; Chapter 2, rare earth elements (demand, heavy rare earths in magnets); Chapter 3, value of rare earths in magnets.

    Terbium in magnets, its share of magnet value, prices in Europe and China, and the export controls of 2025.

    • continue to play small but significant roles in phosphors, displays, medical equipment, nuclear reactors and metallurgy, but the strongest driver of their demand growth has been their use as additives to enhance the performance of modern permanent magnets
    • high-performance EV traction motors contain around 8.5-11% of HREEs by weight
    • although the latest designs could have much lower content of around 2%, but with performance trade-offs
    • Manufacturers are improving grain boundary engineering, motor cooling and system design to achieve equivalent functionality with less dysprosium or terbium
    • demand for magnet rare earths – neodymium, praseodymium, dysprosium and terbium – continues to grow steadily. It has doubled since 2015
    • In the STEPS, global demand for magnet rare earths is set to expand by a quarter between 2025 and 2030, approaching 120 kilotonnes
    • and by over 80% to 2050, reaching 170 kt REE
  5. 5

    U.S. Department of Energy, 2022. Rare Earth Permanent Magnets: Supply Chain Deep Dive Assessment , Section 1 (introduction); magnet manufacturing (dysprosium and terbium additions); section 3.2.1.4 (Table 11, price volatility) and 3.2.1.5 (substitutes).

    Why magnet makers add terbium or dysprosium to neodymium magnets, and how much.

    • Sintered NdFeB magnets are the strongest magnets commercially available
    • heavy REs such as dysprosium (Dy) and terbium (Tb) are used primarily in sintered magnets to improve their resistance to demagnetization at temperatures above 120 degrees C
    • have small additions (0.5 to 11 percent) of Dy or Tb that improve the high-temperature resistance to demagnetization
    • Dy and Tb can be substituted as HREs within a specific magnet grade
    • total HRE content can be halved by the use of processes such as the grain boundary diffusion (GBD) process
  6. 6

    U.S. Department of Energy, 2011. Critical Materials Strategy , Executive summary.

    Terbium and four other rare earths found critical in the short term, for magnets and lamp phosphors.

    • These five REEs are used in magnets for wind turbines and
  7. 7

    Royal Society of Chemistry, 2026. Terbium - Element information, properties and uses , Sections History, Uses and properties, Biological role, Natural abundance; podcast transcript by Louise Natrajan.

    Discovery, name, uses, biological role, minerals, separation and metal production.

    • Terbium in the +3 state radiates an aesthetically pleasing luminous green colour
    • The human eye is particularly sensitive to the colour green
    • It has been used to improve the safety of medical x-rays by allowing the same quality image to be produced with a much shorter exposure time.
  8. 8

    Britannica Editors, Encyclopaedia Britannica, 2026. terbium .

    Properties, discovery, isotopes, sources, metal production and uses. Read with Firecrawl; the site refused a script.

    • Terbium compounds are used as green phosphors in fluorescent lamps, computer monitors, and TV screens that use cathode-ray tubes.
    • Another major use is with dysprosium and iron in the magnetostrictive alloy Terfenol-D (Tb0.3Dy0.7Fe2)
    • which is a component of magnetically controlled actuators, sonar systems, and pressure sensors
  9. 9

    U.S. Geological Survey (Joseph Gambogi), 2016. Rare Earths, in 2013 Minerals Yearbook , Sections on government programs (Department of Defense stockpile report) and US producers (Terfenol-D).

    Terbium as a potential shortfall material for the US Department of Defense, and the US maker of Terfenol-D in 2013.

    • ETREMA Products (Ames, IA) was the sole producer of the magneto-restrictive alloy Terfenol-D
  10. 10

    U.S. Geological Survey (Bradley S. Van Gosen, Philip L. Verplanck, Robert R. Seal II, Keith R. Long and Joseph Gambogi), 2017. Rare-earth elements, chapter O of Critical mineral resources of the United States (Professional Paper 1802-O) , Table O1 (crustal abundance); Uses and applications; Recycling.

    Crustal abundance of terbium after Lide (2004), terbium in phosphors, and Rhodia's plan to use less terbium in phosphors.

    • The company planned to conserve on its consumption of terbium by using reformulated phosphors
  11. 11

    U.S. Geological Survey (Shelby N. Johnston), 2026. Rare earths (heavy), in Mineral Commodity Summaries 2026 , Pp. 1-2: domestic production and use, salient statistics (prices), recycling, import sources, events, world resources, substitutes.

    Terbium oxide prices from 2021 to 2025, US import sources of terbium, China's export controls of 2025, and US loans for heavy rare earths.

    • Substitutes are available for some applications but are generally less effective. Light rare earths can substitute for heavy rare earths in several applications.