What we use oxygen for

Where does it go, and why this element?

About half of industrial oxygen goes into steelmaking, where it burns carbon and other impurities out of molten iron. Chemical plants and refineries use about a fifth. Hospitals use a small part, but medical oxygen has no substitute.

Last updated 5 October 2026.

Where it goes

Where it goes (World)
Steel 48%
Chemicals and refining 19%
2006. Gasworld (2007) estimates, as given by PBL and TNO. The source does not split the other 33% (glass, pulp and paper, metals, water treatment, welding, health care)1

The only world breakdown we found is for 2006. In that estimate, steel used 48% of the oxygen and chemicals 19%1. The chemicals share includes refineries and coal gasification1. The source does not split the other 33%.

The RSC lists the other uses. They include nitric acid, hydrogen peroxide and ethylene oxide, welding and cutting, and the treatment of sewage2. A German study adds glass, pulp and medicine3.

Medical oxygen is a small part of the total. The authors of a Lancet commission estimate that patients with acute medical and surgical needs require at least 1.2 billion normal cubic meters a year4. By our calculation, that is about 1.7 million tonnes, less than 1% of the 2006 world estimate. In India before Covid-19, about 1,000 of the 6,900 tonnes made each day was available for medical use5.

Why this element

In steelmaking, a jet of pure oxygen burns carbon and other impurities out of molten iron6. In 2025, this basic oxygen route made 69.4% of the world’s 1,849 million tonnes of crude steel7. In EU plants, it uses about 50 to 70 cubic meters of oxygen for each tonne of steel8. Blast furnaces also use oxygen to enrich the air they blow in6.

Oxygen makes fuels burn hotter than air does. Steel plants add it to air for a higher flame temperature and better energy efficiency1. Oxygen and acetylene make a flame hot enough for welding6. In rockets, liquid oxygen burns liquid hydrogen or other fuels6.

In medicine, oxygen treats hypoxaemia, a low level of oxygen in the blood. The WHO calls it a life-saving essential medicine with no substitute4.

What could replace it

For most uses, nothing can. In its 2018 merger review, the FTC found no viable substitutes for bulk liquid oxygen in most applications9.

The source of the oxygen can change. Hospitals can use liquid oxygen, cylinders, on-site plants or concentrators. The Lancet commission authors recommend a mix of these4.

Where demand is going

PBL and TNO give world growth of 5 to 6% a year, from a 2007 source1. In Western Europe, supply grows by less than 1% a year1. We found no newer world forecast with a stated method.

Two changes may affect supply. If hydrogen from electrolysis grows, its by-product oxygen can replace some oxygen from air separation3. The Lancet commission authors expect medical need to rise with population growth and with more surgery and long-term therapy4.

Sources

  1. 1

    M. Cioli, K.M. Schure and D. van Dam, PBL Netherlands Environmental Assessment Agency and TNO, 2021. Decarbonisation options for the Dutch industrial gases production , Summary p. 5; section 1.3; section 2.2.1 (pp. 21-23); section 3 and 3.4 (pp. 26-27).

    World oxygen use and its split by sector (from Gasworld 2007), how air separation works, and its electricity use.

    • consumes 48% of the global oxygen demand (580 kt/day) ... This sector represents 19% of the global oxygen consumption
    • The steel industry represents the largest end-user industry sector, which consumes 48% of the global oxygen demand … This sector represents 19% of the global oxygen consumption
    • The oxygen is used in large quantity for coal gasification to generate synthesis gas or to enrich air feed for catalytic cracking in refineries
    • the oxygen is used to enrich air for the increase of combustion temperature and energy efficiency
    • it has maintained a constant growth of 5-6%
    • it currently grows by less than 1% annually
  2. 2

    Royal Society of Chemistry, 2026. Oxygen: element information, properties and uses , Uses; Biological role; Natural abundance; History; Supply risk (data from the British Geological Survey); podcast transcript.

    Crustal abundance, production methods, uses and discovery.

    • nitric acid and hydrogen peroxide … epoxyethane (ethylene oxide) … Oxygen gas is used for oxy-acetylene welding and cutting of metals. A growing use is in the treatment of sewage
  3. 3

    Luka Bornemann, Wolfram Tuschewitzki and Martin Kaltschmitt, Energy Conversion and Management X 29, 2026. Exploring the impact of synergistic oxygen and waste heat utilization from electrolysis in supporting a climate-neutral energy infrastructure in Germany , Introduction; Table notes, Appendix (German oxygen production in 2017).

    Oxygen from electrolysis (about 8 kg per kg of hydrogen) and German oxygen production of 9 Mt in 2017. Open-access copy in the TU Hamburg repository.

    • (e.g., steel, glass, pulp, medical
    • oxygen from electrolyzers can replace oxygen from air separation units (ASUs)
  4. 4

    Hamish R Graham and others, The Lancet Global Health 13, 2025. Reducing global inequities in medical oxygen access: the Lancet Global Health Commission on medical oxygen security .

    Medical oxygen need and access, the market for medical oxygen, the Peru case, and history.

    • Patients with acute medical and surgical needs require a minimum of 1·2 billion normal cubic metres (Nm3) of medical oxygen annually
    • added to WHO’s Essential Medicines List as a treatment for hypoxaemia, in which it was described as
    • Most health systems and health facilities will benefit from a mixed-source oxygen supply (ie, liquid oxygen, oxygen plant, oxygen cylinders, and oxygen concentrator)
    • This need is rising, driven by population growth and unmet surgery and long-term oxygen therapy needs
  5. 5

    Moonis Mirza and others, Indian Journal of Community Medicine, 2023. India’s Multi-Sectoral Response to Oxygen Surge Demand during COVID-19 Pandemic: A Scoping Review .

    Oxygen production and medical demand in India before and during the 2021 Covid-19 wave, and the government's response.

    • of the total 6900 MT of oxygen produced in India, only 1000 MT was available for medical usage
  6. 6

    National Center for Biotechnology Information (PubChem), 2026. Oxygen (element summary, PUG View) , History and uses sections.

    Discovery by Scheele and Priestley, their names for the gas, and main uses.

    • Impurities in molten pig iron are burned away with streams of high pressure oxygen to produce steel
    • Oxygen enrichment of steel blast furnaces accounts for the greatest use of the gas
    • Oxygen can also be combined with acetylene (C2H2) to produce an extremely hot flame used for welding
    • Liquid oxygen, when combined with liquid hydrogen, makes an excellent rocket fuel
  7. 7

    World Steel Association (worldsteel), the steel industry association, 2026. World Steel in Figures 2026 , Crude steel production by process, 2025.

    World crude steel production in 2025 and the share made in oxygen furnaces.

    • Total of above countries … 1 848.9 … 69.4
  8. 8

    R. Remus, M. A. Aguado-Monsonet, S. Roudier and L. Delgado Sancho, European Commission Joint Research Centre, 2013. Best Available Techniques (BAT) Reference Document for Iron and Steel Production , Table 7.3, input/output data from 21 basic oxygen steelmaking plants, p. 368.

    Oxygen used per tonne of liquid steel in EU oxygen steelmaking plants.

    • 49.5 – 70
  9. 9

    U.S. Federal Trade Commission, 2018. FTC Requires International Industrial Gas Suppliers Praxair, Inc. and Linde AG to Divest Assets in Nine Industrial Gas Markets as a Condition of Merger .

    Press release of 22 October 2018. Market structure for bulk liquid oxygen and the divestitures required.

    • For most applications, bulk liquid oxygen, nitrogen and argon have no viable substitutes