What we use helium for
Where does it go, and why this element?
Helium cools the magnets of MRI scanners and research instruments, protects the making of chips and optical fiber, and fills balloons. It boils at a lower temperature than any other substance, and nothing replaces it for the coldest uses.
Last updated 5 October 2026.
Where it goes
The USGS publishes end-use shares for the United States only. In 2025, the largest use was in laboratories and in analytical and specialty gases, at 22%. Controlled atmospheres for optical fiber and semiconductors took 17%, lifting gas 17% and MRI 15%. Aerospace took 9%, welding 8%, diving 5% and leak detection 5%1.
The United States used about 51 million cubic meters in 20251. That is about a quarter of world production (51 of 190 million cubic meters). Other countries may use helium differently. We found no world split from an official source.
The categories change from one USGS edition to the next, so we do not show a trend. For 2010, for example, the USGS gave “cryogenic applications” as the largest use, at 32%2.
Why this element
Helium boils at −268.9 °C, about 4 degrees above absolute zero3. No other substance has a lower boiling point3. Liquid helium is used to cool superconducting magnets. These magnets are in MRI scanners, NMR spectrometers and the Large Hadron Collider3. Philips states that a conventional MRI magnet needs about 1,500 liters of liquid helium4. According to an instrument maker, a typical NMR instrument holds 90 to 120 liters5.
Helium does not react with anything. Factories use it as a protective gas when they make optical fiber and semiconductors, and in arc welding3. Before 2026, chipmakers in Taiwan and South Korea imported 85% and 60% of their helium from Qatar, according to a consultant5.
Helium is light and does not burn, so it fills balloons, weather balloons and airships. It is also used to find leaks3. Helium mixed with oxygen, called heliox, makes breathing easier. It can help newborn babies with breathing problems, and it helps divers go deep3.
Helium-3, the rare light form, absorbs neutrons. This makes it useful in detectors that find nuclear material at borders6. The USGS lists neutron detectors, research and quantum computing as its main uses1.
What could replace it
For the coldest uses, nothing replaces helium. The USGS states that nothing substitutes for helium below −429 °F, about −256 °C1. Engineers are developing superconductors that work at higher temperatures and can be cooled with nitrogen1.
MRI makers can also use much less helium. Philips sells a sealed magnet that it fills with 7 liters of helium in the factory4.
Other uses have substitutes, with some loss:
- Lifting: hydrogen, which burns1.
- Diving: argon and hydrogen1.
- Welding: argon and nitrogen1.
- Protective atmospheres: other noble gases1.
- Gas chromatography: hydrogen as the carrier gas. One chemical company in Philadelphia began to move half of its instruments to hydrogen in 2026. A scientist there said the change needs a lot of work5.
For helium-3 in neutron detection and medical imaging, the CRS reported that alternatives exist. Some low-temperature research can only use helium-36.
Sources
- 1
U.S. Geological Survey (Robert C. Goodin), 2026. Helium and rare gases, in Mineral Commodity Summaries 2026 .
Helium: US and world production, reserves, resources, price, uses and events in 2025. Rare gases: world and US neon production in 2024 and 2025 (from Intelligas and Techcet), US argon sales. World krypton production in 2024 and 2025, US krypton sales, US krypton uses in 2025, imports and net import reliance.
-
analytical, engineering, lab, science, and specialty gases (22%); controlled atmospheres, fiber optics, and semiconductors (17%); lifting gas (17%); magnetic resonance imaging (15%); aerospace (9%); welding (8%); diving (5%); leak detection (5%); and other applications (2%)
-
analytical, engineering, lab, science, and specialty gases (22%); controlled atmospheres, fiber optics, and semiconductors (17%); lifting gas (17%); magnetic resonance imaging (15%); aerospace (9%); welding (8%); diving (5%); leak detection (5%)
-
Consumption, apparent:5 … Grade-A and gaseous helium … 51
-
Helium-3 was mainly used for neutron detectors, research, and quantum computing
-
Nothing substitutes for helium in cryogenic applications if temperatures below −429 degrees Fahrenheit are required
-
Superconductors, including those in magnetic resonance imaging, are being developed to operate at higher temperatures using nitrogen instead of helium as a coolant
-
Hydrogen can be substituted for helium in some lighter-than-air applications
-
Argon and hydrogen can be used as a substitute for helium in diving applications
-
Argon, helium, and nitrogen can be substituted for each other in welding applications
-
Helium and rare gases can be substituted for each other in inert-atmosphere uses
-
- 2
U.S. Geological Survey, 2011. Helium, in Mineral Commodity Summaries 2011 .
Government and private helium prices in 2010.
-
Estimated 2010 domestic consumption of 54 million cubic meters (1.9 billion cubic feet) was used for cryogenic applications, 32%
-
- 3
Royal Society of Chemistry, 2026. Helium: element information, properties and uses .
Discovery, name, uses, abundance and loss to space.
-
Boiling point −268.928°C, −452.07°F, 4.222 K
-
liquid helium has the lowest boiling point of any substance
-
Helium is used as a cooling medium for the Large Hadron Collider (LHC), and the superconducting magnets in MRI scanners and NMR spectrometers
-
Because it is very unreactive, helium is used to provide an inert protective atmosphere for making fibre optics and semiconductors, and for arc welding
-
Because of its low density helium is often used to fill decorative balloons, weather balloons and airships … Helium is also used to detect leaks
-
helium can be mixed with oxygen in order to make breathing easier. This mixture, known as heliox, can help save new-born babies with breathing problems, or help underwater divers safely reach the depths of the oceans
-
- 4
Royal Philips (company press release), 2023. Philips' BlueSeal helium-free MR operations magnet wins Best New Technology Solution for Radiology award .
Helium in a conventional MRI magnet and in a sealed magnet, as stated by the maker.
-
compared to around 1,500 liters required for a conventional MR magnet
-
Pre-loaded with a mere 7 liters of helium during manufacture
-
- 5
Chemical & Engineering News (American Chemical Society), 2026. Helium supplies are tight, and it could get worse .
Effects of the 2026 loss of Qatari helium on users, suppliers and prices.
-
A typical NMR unit has 90 to 120 L of liquid helium inside
-
semiconductor manufacturers in Taiwan and South Korea imported 85% and 60% of their helium from Qatar, respectively
-
That team is now moving about half of its instruments over to hydrogen as a carrier gas, a switch that requires a lot of work and method redevelopment
-
- 6
Congressional Research Service, 2010. The Helium-3 Shortage: Supply, Demand, and Options for Congress (R41419) .
Sources and uses of helium-3 and the shortage after 2001. Copy hosted by EveryCRSReport.
-
Helium-3 also absorbs neutrons. This property has resulted in its widespread use for neutron detection
-
some types of cryogenic research can only be accomplished using helium-3, whereas in medical imaging and neutron detection, helium-3 has advantages but also alternatives
-