How we get protactinium
How much do we make each year, and how?
Nobody produces protactinium on a regular scale, and no one publishes a world total. The largest batch, over 100 grams, came from the waste of a British uranium refinery12. Laboratories make small amounts of protactinium-233 from thorium or neptunium.
Last updated 14 October 2026.
How much is produced
We found no world production figure. The amounts on record are single batches:
- Mound Laboratory, Ohio, United States. About one gram of protactinium-231 by 19591. Of this, about 700 milligrams was chemically pure1.
- UK Atomic Energy Authority, Springfields Works, England. Over 100 grams of protactinium, with nearly 12 tons of uranium from the same waste2. H. W. Kirby wrote in 1959 that almost 100 grams had recently been isolated in Great Britain1. Eric Scerri, in a Royal Society of Chemistry podcast, gives 125 grams from 60 tons of waste in 19613.
Scerri adds that for many years this batch was the only large supply of protactinium for laboratories around the world3.
Who produces it
In 1954, Oak Ridge National Laboratory asked Mound Laboratory to recover protactinium, so that chemists could study its chemistry in larger amounts1. In Britain, the UK Atomic Energy Authority recovered protactinium at its Springfields uranium refinery2. Kirby wrote in 1959 that interest in thorium breeder reactors was the reason for this work1.
Today, laboratories make small amounts of protactinium-233 for their own measurements. A team from US, Canadian and British laboratories named two ways in 2019: separation from neptunium-237, and irradiation of thorium-232 with neutrons4. The Royal Society of Chemistry states that protactinium is also extracted from spent nuclear fuel3.
How it is mined and refined
The British process started from “ethereal sludge”, a residue that collected on the walls of the plant that purified uranium with ether5. The process had five steps2.
- Cold nitric acid with fluoride leached protactinium and uranium from the sludge.
- A solvent extracted the uranium.
- Aluminum chloride made a solid that carried the protactinium.
- Hydrochloric acid dissolved that solid.
- A second solvent, di-isobutyl ketone, extracted the protactinium.
The process recovered 63% of the protactinium and 99.4% of the uranium2. The residue that Mound Laboratory used held about 0.1 to 0.2 ppm of protactinium1.
In a thorium reactor, protactinium-233 forms on the way from thorium-232 to uranium-233, the fuel6. Its half-life is about 27 days. For this reason, the IAEA states that spent fuel must cool for at least 12 months before reprocessing6.
What it costs to produce
Recycling
We found no recycling rate for protactinium. The British batch was shared out to laboratories as samples3. We found no record of what became of it.
Sources
- 1
H. W. Kirby, Mound Laboratory, for the National Academy of Sciences–National Research Council, Nuclear Science Series, 1959. The Radiochemistry of Protactinium (NAS-NS 3016) , Section III.1 'General', p. 4; Appendix on the protactinium project at Mound Laboratory, pp. 65-66 and 75-76.
The world supply of protactinium before 1960, the reason for the British and US recovery work, and the Mound Laboratory project. Copy in the OpenMSR archive; the text layer of the scan is out of reading order, so the quote check uses the text read with pdftotext -layout.
-
The production of approximately one gram of protactinium-231
-
approximately 700 milligrams of chemically
-
Almost 100 grams of protactinium-231 was recently isolated
-
The protactinium project waé initiated in-1954 at the ;eqfiest of Oak Ridge National Laboratory
-
Interest in thorium breeder reactors gave necessary
-
contained approximately 0.1 to 0.2 ppm of protactinium
-
- 2
D. A. Collins, J. J. Hillary, J. S. Nairn and G. M. Phillips (Journal of Inorganic and Nuclear Chemistry 24:441), 1962. The development and application of a process for the recovery of over 100g of protactinum-231 from a uranium refinery waste material , Abstract.
The British recovery of protactinium-231 from the ethereal sludge of the Springfields uranium refinery, the process steps and the efficiency. Read with Firecrawl.
-
the recovery of over 100 g of protactinium and of nearly 12 tons of uranium
-
produced during uranium refining at the U.K.A.E.A. Springfields Works
-
involves the following stages
-
with an efficiency of 63 per cent for protactinium and 99·4 per cent for uranium
-
The above process was successfully applied to the recovery of over 100 g of protactinium
-
- 3
Royal Society of Chemistry, 2025. Protactinium, in the Periodic Table .
Crustal abundance (British Geological Survey data), uses, biological role, history, and the podcast 'Chemistry in its element: protactinium' by Eric Scerri (Mendeleev's prediction, the discovery, the British batch of 1961).
-
In 1961 the Atomic Energy Authority in Britain produced a concentrated mass of 125 grams of protactinium after processing 60 tons of radioactive waste.
-
For many years this has remained as the only significant supply of protactinium which has provided samples of the element to labs around the world.
-
It is also found in spent fuel rods from nuclear reactors, from which it is extracted.
-
which has provided samples of the element to labs around the world
-
- 4
R. M. Essex and others, NIST, LLNL, the National Research Council of Canada and the UK National Physical Laboratory (Journal of Radioanalytical and Nuclear Chemistry), author manuscript on PubMed Central, 2019. Preparation and calibration of a 231Pa reference material , Abstract and introduction.
A protactinium-231 reference material, why nuclear forensics needs it, and the two ways to make protactinium-233.
-
The two principal methods for obtaining starting material for a 233Pa IDMS spike are separation from 237Np … and thermal neutron irradiation of 232Th
-
- 5
J. F. Parisi and A. Rutkowski, Marathon Fusion (arXiv:2609.19166, preprint, not peer reviewed), 2026. Scalable Production of Lead-212 and Actinium-225 Generators with Fusion Neutrons , Abstract, section V and the appendix on feedstocks.
A proposal to make protactinium-231 with fusion neutrons, and the authors' account of the British batch and of protactinium chemistry.
-
The sludge had built up on the walls of the uranium ether-extraction plant
-
- 6
International Atomic Energy Agency, 2005. Thorium fuel cycle — Potential benefits and challenges (IAEA-TECDOC-1450) , Section 1 (challenges) and section 4, 'The protactinium problem', pp. 64-65.
Protactinium-233 between thorium and uranium-233, the cooling time before reprocessing, and protactinium-231 in the waste.
-
In the conversion chain of 232Th to 233U, 233Pa is formed as an intermediate
-
relatively longer half-life (~27 days) … it is necessary to have a cooling time of at least 12 months (more than 10 half-lives of 233Pa), prior to reprocessing
-
- 7
Argonne National Laboratory, Environmental Science Division (J. Peterson, M. MacDonell, L. Haroun, F. Monette), with the US Department of Energy, 2007. Protactinium, Human Health Fact Sheet (August 2005), in Radiological and Chemical Fact Sheets to Support Health Risk Analyses for Contaminated Areas , Protactinium fact sheet (two pages).
Natural isotopes, the amount in uranium ores and the environment, the lack of commercial uses, how protactinium moves in the body, and the cancer risk.
-
There are no industrial or commercial uses of protactinium due to its scarcity, expense, and radiotoxicity.
-